From: "Govindapillai, Vinod" <vinod.govindapillai@intel.com>
To: "igt-dev@lists.freedesktop.org" <igt-dev@lists.freedesktop.org>,
"Hogander, Jouni" <jouni.hogander@intel.com>,
"B, Jeevan" <jeevan.b@intel.com>
Subject: Re: [PATCH i-g-t] tests/intel/kms_psr2_sf: Fix primary_format setting
Date: Thu, 21 Dec 2023 09:16:34 +0000 [thread overview]
Message-ID: <ca8065f9496f3afe0fed1b7084fc2b8453ae98e0.camel@intel.com> (raw)
In-Reply-To: <20231220183129.2797363-1-jeevan.b@intel.com>
Hi
Well.. I tried these changes and the fbc variant of kms_psr2_sf tests are all passing.
But I think, at some point some refactoring is warranted for this whole kms_psr_sf tests as the code
looks clumsy with unstructured "data" handling.
+Jouni, to see if all the selective fetch cases are handled as expected!
And please check two comments inline, with those addressed,
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
BR
vinod
On Thu, 2023-12-21 at 00:01 +0530, Jeevan B wrote:
> The format is being changed globally to DRM_FORMAT_NV12. Additionally,
> FBC doesn't support the NV12 format, so this issue is being addressed.
>
> v2: Initialize data members at the beginning of the loop.
> bigfb plane size is too big for FBC, so skipping that test.
>
> Signed-off-by: Jeevan B <jeevan.b@intel.com>
> ---
> tests/intel/kms_psr2_sf.c | 68 +++++++++++++++++++++++----------------
> 1 file changed, 40 insertions(+), 28 deletions(-)
>
> diff --git a/tests/intel/kms_psr2_sf.c b/tests/intel/kms_psr2_sf.c
> index 76435f501..9cafe1f7a 100644
> --- a/tests/intel/kms_psr2_sf.c
> +++ b/tests/intel/kms_psr2_sf.c
> @@ -68,13 +68,13 @@
> * SUBTEST: cursor-plane-update-sf
> * Description: Test that selective fetch works on cursor plane
> *
> - * SUBTEST: fbc-cursor-plane-update-continuous-sf
> + * SUBTEST: fbc-cursor-plane-update-sf
> * Description: Test that fbc with selective fetch works on cursor plane
> *
> * SUBTEST: overlay-plane-update-continuous-sf
> * Description: Test that selective fetch works on overlay plane
> *
> - * SUBTEST: fbc-overlay-plane-update-continuous-sf-dmg-area
> + * SUBTEST: fbc-overlay-plane-update-sf-dmg-area
> * Description: Test that fbc with selective fetch works on overlay plane
> *
> * SUBTEST: overlay-plane-update-sf-dmg-area
> @@ -100,14 +100,12 @@
> * SUBTEST: primary-plane-update-sf-dmg-area
> * Description: Test that selective fetch works on primary plane
> *
> - * SUBTEST: fbc-primary-plane-update-continuous-sf-dmg-area
> + * SUBTEST: fbc-primary-plane-update-sf-dmg-area
> * Description: Test that fbc with selective fetch works on primary plane
> *
> * SUBTEST: primary-plane-update-sf-dmg-area-big-fb
> * Description: Test that selective fetch works on primary plane with big fb
> *
> - * SUBTEST: fbc-primary-plane-update-continuous-sf-dmg-area-big-fb
> - * Description: Test that fbc with selective fetch works on primary plane with big fb
> */
>
> IGT_TEST_DESCRIPTION("Tests to varify PSR2 selective fetch by sending multiple"
> @@ -1043,6 +1041,11 @@ igt_main
> }
>
> for (y = 0; y < ARRAY_SIZE(fbc_status); y++) {
> + data.op = PLANE_UPDATE;
> + data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> + data.primary_format = DRM_FORMAT_XRGB8888;
> + data.big_fb_test = 0;
> +
Now that these members are initialized here, do we need the same in igt_fixture block?
> data.op_fbc_mode = fbc_status[y];
> /* Verify primary plane selective fetch */
> igt_describe("Test that selective fetch works on primary plane");
> @@ -1074,29 +1077,35 @@ igt_main
> }
>
> /* Verify primary plane selective fetch with big fb */
> - data.big_fb_test = 1;
> - igt_describe("Test that selective fetch works on primary plane with big fb");
> - igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-area-big-fb",
> append_fbc_subtest[y],
> - op_str(data.op)) {
> - for (i = 0; i < n_pipes; i++) {
> - if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
> - continue;
> -
> - for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
> - if (j != FEATURE_NONE && !(coexist_features[i] & j))
> + if (data.op_fbc_mode == FBC_DISABLED) {
This change should be a separate patch.
> + data.big_fb_test = 1;
> + igt_describe("Test that selective fetch works on primary plane with "
> + "big fb");
> + igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-area-big-fb",
> + append_fbc_subtest[y],
> + op_str(data.op)) {
> + for (i = 0; i < n_pipes; i++) {
> + if (!pipe_output_combo_valid(&data.display, pipes[i],
> + outputs[i]))
> continue;
> - igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
> - igt_output_name(outputs[i]),
> - coexist_feature_str(j)) {
> - data.pipe = pipes[i];
> - data.output = outputs[i];
> - data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> - data.coexist_feature = j;
> - for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
> - data.damage_area_count = k;
> - prepare(&data);
> - run(&data);
> - cleanup(&data);
> +
> + for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
> + if (j != FEATURE_NONE && !(coexist_features[i] &
> j))
> + continue;
> + igt_dynamic_f("pipe-%s-%s%s",
> + kmstest_pipe_name(pipes[i]),
> + igt_output_name(outputs[i]),
> + coexist_feature_str(j)) {
> + data.pipe = pipes[i];
> + data.output = outputs[i];
> + data.test_plane_id =
> DRM_PLANE_TYPE_PRIMARY;
> + data.coexist_feature = j;
> + for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
> + data.damage_area_count = k;
> + prepare(&data);
> + run(&data);
> + cleanup(&data);
> + }
> }
> }
> }
> @@ -1387,7 +1396,6 @@ igt_main
> * plane and continuous updates.
> */
> data.op = PLANE_UPDATE_CONTINUOUS;
> - data.primary_format = DRM_FORMAT_NV12;
> igt_describe("Test that selective fetch works on overlay plane");
> igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y],
> op_str(data.op)) {
> @@ -1404,6 +1412,10 @@ igt_main
> data.pipe = pipes[i];
> data.output = outputs[i];
> data.damage_area_count = 1;
> + if (data.op_fbc_mode == FBC_ENABLED)
> + data.primary_format = DRM_FORMAT_XRGB8888;
> + else
> + data.primary_format = DRM_FORMAT_NV12;
> data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
> data.coexist_feature = j;
> prepare(&data);
next prev parent reply other threads:[~2023-12-21 9:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-20 18:31 [PATCH i-g-t] tests/intel/kms_psr2_sf: Fix primary_format setting Jeevan B
2023-12-21 9:16 ` Govindapillai, Vinod [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-12-14 15:42 Jeevan B
2023-12-18 12:12 ` Govindapillai, Vinod
2023-12-19 6:43 ` B, Jeevan
2023-12-19 7:12 ` Govindapillai, Vinod
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ca8065f9496f3afe0fed1b7084fc2b8453ae98e0.camel@intel.com \
--to=vinod.govindapillai@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=jeevan.b@intel.com \
--cc=jouni.hogander@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox