From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga18.intel.com (mga18.intel.com [134.134.136.126]) by gabe.freedesktop.org (Postfix) with ESMTPS id 54DF86E447 for ; Mon, 11 May 2020 11:57:36 +0000 (UTC) References: <20200507102210.23599-1-anshuman.gupta@intel.com> <20200507102210.23599-4-anshuman.gupta@intel.com> From: "Nautiyal, Ankit K" Message-ID: Date: Mon, 11 May 2020 17:27:32 +0530 MIME-Version: 1.0 In-Reply-To: <20200507102210.23599-4-anshuman.gupta@intel.com> Subject: Re: [igt-dev] [PATCH i-g-t v7 3/5] tests/i915_pm_lpsp: lpsp platform agnostic support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Errors-To: igt-dev-bounces@lists.freedesktop.org Sender: "igt-dev" To: Anshuman Gupta , igt-dev@lists.freedesktop.org Cc: jani.nikula@intel.com List-ID: On 5/7/2020 3:52 PM, Anshuman Gupta wrote: > Current implementation of lpsp igt test, assumed that every non-edp > panel isn't a lpsp panel but it is not true on TGL anymore, > any HDMI/DP/DSI panel connected on pipe A and connected to PORT_{A,B,C} > can drive LPSP. > Even on older Gen9 platform a DP panel can drive lpsp on Port A. > This requires complete design change in current lpsp igt for a platform > agnostic support. > > The new igt approach is relies on connector specific > i915_lpsp_capability and i915_lpsp_status debugfs attributes, > these debugfs exposes whether an output is capable of driving lpsp > and lpsp is enabled. > > Nuking edp-native and non-edp test, introducing a new dynamic > igt subtest kms-lpsp, which validates lpsp on each connected output > and skip the subtest if output is not lpsp capable. > > Skip screens-disabled test for platform which support DC states. > screens-disabled test is only valid for the platforms like HSW/BDW > where PG1 is Always-ON power domain, so these platform test lpsp > with all screen disabled i.e validate PG2 when all screen are > disabled. > DC state i.e DMC f/w supported platforms don't have any ROI to validate > screens-disabled subtest as existing dc*-dpms i915_pm_dc > subtest already validate it implicitly. > > v2: > - CI failures fixup. > v3: > - removed unloading of snd_modules. [Martin] > v4: > - Don't test non-lpsp(if lpsp disabled), no ROI to test that. > - nuke panel-fitter test. > v5: > - Added dynamic subtest and igt changes according to kernel > debugfs i915_lpsp_status changes. > v6: > - Avoided pipe big joiner by using 4k or lesser mode, > so igt will not fail when pipe big joiner patches will > land to kernel. > v7: > - Combined [v6 4/6] patch to this patch, skip the screens-disabled > subtest for DC state supported platforms. [Animesh] > > Signed-off-by: Anshuman Gupta > --- > tests/i915/i915_pm_lpsp.c | 313 ++++++++++++++++++-------------------- > 1 file changed, 147 insertions(+), 166 deletions(-) > > diff --git a/tests/i915/i915_pm_lpsp.c b/tests/i915/i915_pm_lpsp.c > index 08f82e7c..46937efb 100644 > --- a/tests/i915/i915_pm_lpsp.c > +++ b/tests/i915/i915_pm_lpsp.c > @@ -25,210 +25,191 @@ > */ > > #include "igt.h" > +#include "igt_kmod.h" > +#include "igt_pm.h" > +#include "igt_sysfs.h" > #include > #include > #include > #include > > +#define MAX_SINK_LPSP_INFO_BUF_LEN 4096 > > -static bool supports_lpsp(uint32_t devid) > -{ > - return IS_HASWELL(devid) || IS_BROADWELL(devid); > -} > +#define PWR_DOMAIN_INFO "i915_power_domain_info" > > -static bool lpsp_is_enabled(int drm_fd) > +typedef struct { > + int drm_fd; > + int debugfs_fd; > + uint32_t devid; > + char *pwr_dmn_info; > + igt_display_t display; > + struct igt_fb fb; > + drmModeModeInfo *mode; > + igt_output_t *output; > +} data_t; > + > +static bool lpsp_is_enabled(data_t *data) > { > - uint32_t val; > + char buf[MAX_SINK_LPSP_INFO_BUF_LEN]; > + int len; > > - val = INREG(HSW_PWR_WELL_CTL2); > - return !(val & HSW_PWR_WELL_STATE_ENABLED); > -} > + len = igt_debugfs_simple_read(data->debugfs_fd, "i915_lpsp_status", > + buf, sizeof(buf)); > + if (len < 0) > + igt_assert_eq(len, -ENODEV); > > -/* The LPSP mode is all about an enabled pipe, but we expect to also be in the > - * low power mode when no pipes are enabled, so do this check anyway. */ > -static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res) > -{ > - kmstest_unset_all_crtcs(drm_fd, drm_res); > - igt_assert(lpsp_is_enabled(drm_fd)); > + igt_skip_on(strstr(buf, "LPSP: not supported")); > + > + return strstr(buf, "LPSP: enabled"); > } > > -static uint32_t create_fb(int drm_fd, int width, int height) > +static bool dmc_supported(int debugfs) > { > - struct igt_fb fb; > + char buf[15]; > + int len; > > - return igt_create_pattern_fb(drm_fd, width, height, DRM_FORMAT_XRGB8888, > - LOCAL_DRM_FORMAT_MOD_NONE, &fb); > + len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1); > + > + if (len < 0) > + return false; > + else > + return true; > } > > -static void edp_subtest(int drm_fd, drmModeResPtr drm_res, > - drmModeConnectorPtr *drm_connectors, uint32_t devid, > - bool use_panel_fitter) > +/* > + * The LPSP mode is all about an enabled pipe, but we expect to also be in the > + * low power mode when no pipes are enabled, so do this check anyway. > + */ > +static void screens_disabled_subtest(data_t *data) > { > - int i, rc; > - uint32_t crtc_id = 0, buffer_id = 0; > - drmModeConnectorPtr connector = NULL; > - drmModeModeInfoPtr mode = NULL; > - drmModeModeInfo std_1024_mode = { > - .clock = 65000, > - .hdisplay = 1024, > - .hsync_start = 1048, > - .hsync_end = 1184, > - .htotal = 1344, > - .hskew = 0, > - .vdisplay = 768, > - .vsync_start = 771, > - .vsync_end = 777, > - .vtotal = 806, > - .vscan = 0, > - .vrefresh = 60, > - .flags = 0xA, > - .type = 0x40, > - .name = "Custom 1024x768", > - }; > - > - kmstest_unset_all_crtcs(drm_fd, drm_res); > - > - for (i = 0; i < drm_res->count_connectors; i++) { > - drmModeConnectorPtr c = drm_connectors[i]; > - > - if (c->connector_type != DRM_MODE_CONNECTOR_eDP) > - continue; > - if (c->connection != DRM_MODE_CONNECTED) > - continue; > - > - if (!use_panel_fitter && c->count_modes) { > - connector = c; > - mode = &c->modes[0]; > - break; > - } > - if (use_panel_fitter) { > - connector = c; > - > - /* This is one of the modes Xorg creates for panels, so > - * it should work just fine. Notice that Gens that > - * support LPSP are too new for panels with native > - * 1024x768 resolution, so this should force the panel > - * fitter. */ > - igt_assert(c->count_modes && > - c->modes[0].hdisplay > 1024); > - igt_assert(c->count_modes && > - c->modes[0].vdisplay > 768); > - mode = &std_1024_mode; > - break; > - } > - } > - igt_require(connector); > - > - crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector, > - 0); > - buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay); > - > - igt_assert(buffer_id); > - igt_assert(connector); > - igt_assert(mode); > - > - rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0, > - &connector->connector_id, 1, mode); > - igt_assert_eq(rc, 0); > - > - if (use_panel_fitter) { > - if (IS_HASWELL(devid)) > - igt_assert(!lpsp_is_enabled(drm_fd)); > - else > - igt_assert(lpsp_is_enabled(drm_fd)); > - } else { > - igt_assert(lpsp_is_enabled(drm_fd)); > + igt_output_t *output; > + int valid_output = 0; > + enum pipe pipe; > + > + for_each_pipe_with_single_output(&data->display, pipe, output) { > + data->output = output; > + igt_output_set_pipe(data->output, PIPE_NONE); > + igt_display_commit(&data->display); > + valid_output++; > } > + > + igt_require_f(valid_output, "No connected output found\n"); > + igt_assert_f(lpsp_is_enabled(data), "lpsp is not enabled\n%s:\n%s\n", > + PWR_DOMAIN_INFO, data->pwr_dmn_info = > + igt_sysfs_get(data->debugfs_fd, PWR_DOMAIN_INFO)); > } > > -static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, > - drmModeConnectorPtr *drm_connectors) > +static void setup_lpsp_output(data_t *data) > { > - int i, rc; > - uint32_t crtc_id = 0, buffer_id = 0; > - drmModeConnectorPtr connector = NULL; > - drmModeModeInfoPtr mode = NULL; > - > - kmstest_unset_all_crtcs(drm_fd, drm_res); > - > - for (i = 0; i < drm_res->count_connectors; i++) { > - drmModeConnectorPtr c = drm_connectors[i]; > + igt_plane_t *primary; > + > + /* set output pipe = PIPE_A for LPSP */ > + igt_output_set_pipe(data->output, PIPE_A); > + primary = igt_output_get_plane_type(data->output, > + DRM_PLANE_TYPE_PRIMARY); > + igt_plane_set_fb(primary, NULL); > + igt_create_pattern_fb(data->drm_fd, > + data->mode->hdisplay, data->mode->vdisplay, > + DRM_FORMAT_XRGB8888, > + LOCAL_DRM_FORMAT_MOD_NONE, > + &data->fb); > + igt_plane_set_fb(primary, &data->fb); > + igt_display_commit(&data->display); > +} > > - if (c->connector_type == DRM_MODE_CONNECTOR_eDP) > - continue; > - if (c->connection != DRM_MODE_CONNECTED) > - continue; > +static void test_cleanup(data_t *data) > +{ > + igt_plane_t *primary; > + > + if (!data->output || data->output->pending_pipe == PIPE_NONE) > + return; > + > + primary = igt_output_get_plane_type(data->output, > + DRM_PLANE_TYPE_PRIMARY); > + igt_plane_set_fb(primary, NULL); > + igt_output_set_pipe(data->output, PIPE_NONE); > + igt_display_commit(&data->display); > + igt_remove_fb(data->drm_fd, &data->fb); > + data->output = NULL; > +} > > - if (c->count_modes) { > - connector = c; > - mode = &c->modes[0]; > - break; > +static void test_lpsp(data_t *data) > +{ > + drmModeConnectorPtr c = data->output->config.connector; > + int i; > + > + /* LPSP is low power single pipe usages i.e. PIPE_A */ > + igt_require(igt_pipe_connector_valid(PIPE_A, data->output)); > + igt_require_f(i915_output_is_lpsp_capable(data->drm_fd, data->output), > + "output is not lpsp capable\n"); > + > + data->mode = igt_output_get_mode(data->output); > + > + /* For LPSP avoid pipe big joiner by atleast 4k mode */ > + if (data->mode->hdisplay > 3860 && data->mode->vdisplay > 2160) For 4K mode the resolution is either 4096 x 2160 or 3840 x 2160. should the hdisplay be 3840 instead? Also, should we check from the first mode, not sure if the first mode is always the default mode. Regards, Ankit > + for (i = 1; i < c->count_modes; i++) { > + if (c->modes[i].hdisplay <= 3860 && > + c->modes[i].vdisplay <= 2160) { > + data->mode = &c->modes[i]; > + igt_output_override_mode(data->output, > + data->mode); > + break; > + } > } > - } > - igt_require(connector); > - > - crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector, > - 0); > - buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay); > - > - igt_assert(buffer_id); > - igt_assert(mode); > > - rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0, > - &connector->connector_id, 1, mode); > - igt_assert_eq(rc, 0); > + igt_require(data->mode->hdisplay <= 3860 && > + data->mode->vdisplay <= 2160); > > - igt_assert(!lpsp_is_enabled(drm_fd)); > + setup_lpsp_output(data); > + igt_assert_f(lpsp_is_enabled(data), "%s: lpsp is not enabled\n%s:\n%s\n", > + data->output->name, PWR_DOMAIN_INFO, data->pwr_dmn_info = > + igt_sysfs_get(data->debugfs_fd, PWR_DOMAIN_INFO)); > } > > -#define MAX_CONNECTORS 32 > - > -int drm_fd; > -uint32_t devid; > -drmModeResPtr drm_res; > -drmModeConnectorPtr drm_connectors[MAX_CONNECTORS]; > -struct intel_mmio_data mmio_data; > +IGT_TEST_DESCRIPTION("These tests validates display Low Power Single Pipe configurations"); > igt_main > { > - igt_fixture { > - int i; > - > - drm_fd = drm_open_driver_master(DRIVER_INTEL); > - igt_require(drm_fd >= 0); > - > - devid = intel_get_drm_devid(drm_fd); > - > - drm_res = drmModeGetResources(drm_fd); > - igt_require(drm_res); > - igt_assert(drm_res->count_connectors <= MAX_CONNECTORS); > + data_t data = {}; > > - for (i = 0; i < drm_res->count_connectors; i++) > - drm_connectors[i] = drmModeGetConnectorCurrent(drm_fd, > - drm_res->connectors[i]); > + igt_fixture { > > + data.drm_fd = drm_open_driver_master(DRIVER_INTEL); > + igt_require(data.drm_fd >= 0); > + data.debugfs_fd = igt_debugfs_dir(data.drm_fd); > + igt_require(data.debugfs_fd >= 0); > igt_pm_enable_audio_runtime_pm(); > + kmstest_set_vt_graphics_mode(); > + data.devid = intel_get_drm_devid(data.drm_fd); > + igt_display_require(&data.display, data.drm_fd); > + igt_require(igt_pm_dmc_loaded(data.debugfs_fd)); > + } > > - igt_require(supports_lpsp(devid)); > + igt_describe("This test validates lpsp while all crtc are disabled"); > + igt_subtest("screens-disabled") { > + igt_require_f(!dmc_supported(data.debugfs_fd), > + "DC states supported platform don't have ROI for this subtest\n"); > + screens_disabled_subtest(&data); > + } > > - intel_register_access_init(&mmio_data, intel_get_pci_device(), 0, drm_fd); > + igt_describe("This test validates lpsp on all connected outputs on low power PIPE_A"); > + igt_subtest_with_dynamic_f("kms-lpsp") { > + igt_display_t *display = &data.display; > + igt_output_t *output; > > - kmstest_set_vt_graphics_mode(); > - } > + for_each_connected_output(display, output) { > + igt_dynamic_f("kms-lpsp-%s", > + kmstest_connector_type_str(output->config.connector->connector_type)) { > + data.output = output; > + test_lpsp(&data); > + } > > - igt_subtest("screens-disabled") > - screens_disabled_subtest(drm_fd, drm_res); > - igt_subtest("edp-native") > - edp_subtest(drm_fd, drm_res, drm_connectors, devid, false); > - igt_subtest("non-edp") > - non_edp_subtest(drm_fd, drm_res, drm_connectors); > + test_cleanup(&data); > + } > + } > > igt_fixture { > - int i; > - > - intel_register_access_fini(&mmio_data); > - for (i = 0; i < drm_res->count_connectors; i++) > - drmModeFreeConnector(drm_connectors[i]); > - drmModeFreeResources(drm_res); > - close(drm_fd); > + free(data.pwr_dmn_info); > + close(data.drm_fd); > + igt_display_fini(&data.display); > } > } _______________________________________________ igt-dev mailing list igt-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/igt-dev