Re: [PATCH v3 2/3] intel-ci: Rename chamelium-only testlist to i915 specific

["Sharma, Swati2" <swati2.sharma@intel.com>]

Patch LGTM

Reviewed-by: Swati Sharma <swati2.sharma@intel.com>

On 17-02-2026 02:48 pm, Mohammed Bilal wrote:
> Rename chamelium-only.testlist to i915.chamelium-only.testlist.
>
> v2:
> - Move suspend resume tests to the end of the testlist (Kunal)
> - Comment out random-plane test (Kunal)
>
> v3:
> -Use move-fix-add approach (Kamil)
>
> Signed-off-by: Mohammed Bilal <mohammed.bilal@intel.com>
> ---
>   ....testlist => i915.chamelium-only.testlist} | 23 +++++++++++--------
>   tests/intel-ci/meson.build                    |  2 +-
>   tests/intel/kms_test_config.json              |  2 +-
>   3 files changed, 15 insertions(+), 12 deletions(-)
>   rename tests/intel-ci/{chamelium-only.testlist => i915.chamelium-only.testlist} (91%)
>
> diff --git a/tests/intel-ci/chamelium-only.testlist b/tests/intel-ci/i915.chamelium-only.testlist
> similarity index 91%
> rename from tests/intel-ci/chamelium-only.testlist
> rename to tests/intel-ci/i915.chamelium-only.testlist
> index 9adace28c..56bffd8de 100644
> --- a/tests/intel-ci/chamelium-only.testlist
> +++ b/tests/intel-ci/i915.chamelium-only.testlist
> @@ -12,16 +12,14 @@ igt@kms_chamelium_color@ctm-negative
>   igt@kms_chamelium_color@ctm-red-to-blue
>   igt@kms_chamelium_color@degamma
>   igt@kms_chamelium_color@gamma
> -igt@kms_chamelium_edid@dp-edid-change-during-suspend
>   igt@kms_chamelium_edid@dp-edid-read
>   igt@kms_chamelium_edid@dp-edid-resolution-list
>   igt@kms_chamelium_edid@dp-edid-stress-resolution-4k
>   igt@kms_chamelium_edid@dp-edid-stress-resolution-non-4k
>   igt@kms_chamelium_edid@dp-mode-timings
> -igt@kms_chamelium_edid@hdmi-edid-change-during-suspend
>   igt@kms_chamelium_edid@hdmi-edid-read
> -# Chamelium v1 board HDMI receiver supports max 4k@30 resolution
> -# removed test as its having a mode 4k@60 resulting
> +# Chamelium v1 board HDMI receiver supports max 4k@30 resolution
> +# removed test as its having a mode 4k@60 resulting
>   # TMDS config errors on v1 board
>   #igt@kms_chamelium_edid@hdmi-edid-stress-resolution-4k
>   igt@kms_chamelium_edid@hdmi-edid-stress-resolution-non-4k
> @@ -33,17 +31,17 @@ igt@kms_chamelium_frames@dp-crc-single
>   igt@kms_chamelium_frames@dp-frame-dump
>   igt@kms_chamelium_frames@hdmi-aspect-ratio
>   igt@kms_chamelium_frames@hdmi-cmp-planar-formats
> -igt@kms_chamelium_frames@hdmi-cmp-planes-random
> +# Tests are exhaustive and pick random configurations
> +# removed tests as results are non-deterministic on each run
> +#igt@kms_chamelium_frames@hdmi-cmp-planes-random
> +#igt@kms_chamelium_frames@hdmi-crc-planes-random
>   igt@kms_chamelium_frames@hdmi-crc-fast
>   igt@kms_chamelium_frames@hdmi-crc-multiple
>   igt@kms_chamelium_frames@hdmi-crc-nonplanar-formats
> -igt@kms_chamelium_frames@hdmi-crc-planes-random
>   igt@kms_chamelium_frames@hdmi-crc-single
>   igt@kms_chamelium_frames@hdmi-frame-dump
>   igt@kms_chamelium_frames@vga-frame-dump
> -igt@kms_chamelium_hpd@common-hpd-after-suspend
>   igt@kms_chamelium_hpd@dp-hpd
> -igt@kms_chamelium_hpd@dp-hpd-after-suspend
>   igt@kms_chamelium_hpd@dp-hpd-enable-disable-mode
>   igt@kms_chamelium_hpd@dp-hpd-fast
>   igt@kms_chamelium_hpd@dp-hpd-for-each-pipe
> @@ -51,7 +49,6 @@ igt@kms_chamelium_hpd@dp-hpd-storm
>   igt@kms_chamelium_hpd@dp-hpd-storm-disable
>   igt@kms_chamelium_hpd@dp-hpd-with-enabled-mode
>   igt@kms_chamelium_hpd@hdmi-hpd
> -igt@kms_chamelium_hpd@hdmi-hpd-after-suspend
>   igt@kms_chamelium_hpd@hdmi-hpd-enable-disable-mode
>   igt@kms_chamelium_hpd@hdmi-hpd-fast
>   igt@kms_chamelium_hpd@hdmi-hpd-for-each-pipe
> @@ -61,7 +58,6 @@ igt@kms_chamelium_hpd@hdmi-hpd-with-enabled-mode
>   igt@kms_chamelium_audio@hdmi-audio
>   igt@kms_chamelium_audio@hdmi-audio-edid
>   igt@kms_chamelium_hpd@vga-hpd
> -igt@kms_chamelium_hpd@vga-hpd-after-suspend
>   igt@kms_chamelium_hpd@vga-hpd-enable-disable-mode
>   igt@kms_chamelium_hpd@vga-hpd-fast
>   igt@kms_chamelium_hpd@vga-hpd-for-each-pipe
> @@ -69,6 +65,13 @@ igt@kms_chamelium_hpd@vga-hpd-with-enabled-mode
>   igt@kms_chamelium_hpd@vga-hpd-without-ddc
>   igt@kms_chamelium_sharpness_filter@filter-basic
>   igt@kms_tiled_display@basic-test-pattern-with-chamelium
> +#Place suspend tests at end
> +igt@kms_chamelium_hpd@common-hpd-after-suspend
> +igt@kms_chamelium_hpd@dp-hpd-after-suspend
> +igt@kms_chamelium_hpd@hdmi-hpd-after-suspend
> +igt@kms_chamelium_hpd@vga-hpd-after-suspend
> +igt@kms_chamelium_edid@dp-edid-change-during-suspend
> +igt@kms_chamelium_edid@hdmi-edid-change-during-suspend
>   #Place hibernate tests at end
>   igt@kms_chamelium_edid@dp-edid-change-during-hibernate
>   igt@kms_chamelium_edid@hdmi-edid-change-during-hibernate
> diff --git a/tests/intel-ci/meson.build b/tests/intel-ci/meson.build
> index cf0023c63..466530e08 100644
> --- a/tests/intel-ci/meson.build
> +++ b/tests/intel-ci/meson.build
> @@ -2,11 +2,11 @@
>   
>   intelci_files = [
>     'README',
> -  'chamelium-only.testlist',
>     'fast-feedback.testlist',
>     'fast-feedback-chamelium-only.testlist',
>     'i915.blocklist.txt',
>     'i915.blocklist-pre-merge.txt',
> +  'i915.chamelium-only.testlist',
>     'i915.fast-feedback.testlist',
>     'i915.fast-feedback-chamelium-only.testlist',
>     'meta.testlist',
> diff --git a/tests/intel/kms_test_config.json b/tests/intel/kms_test_config.json
> index 61a70a9bb..e907b4b84 100644
> --- a/tests/intel/kms_test_config.json
> +++ b/tests/intel/kms_test_config.json
> @@ -15,7 +15,7 @@
>                       "include": [
>                           { "i915 BAT": "../intel-ci/i915.fast-feedback.testlist" },
>                           { "i915 BAT chamelium": "../intel-ci/i915.fast-feedback-chamelium-only.testlist" },
> -                        { "i915 chamelium": "../intel-ci/chamelium-only.testlist" },
> +                        { "i915 chamelium": "../intel-ci/i915.chamelium-only.testlist" },
>   
>                           { "Xe BAT": "../intel-ci/xe.fast-feedback.testlist" },
>                           { "Xe BAT chamelium": "../intel-ci/xe.fast-feedback-chamelium-only.testlist" }