Re: [igt-dev] [PATCH i-g-t v4] tests/i915/i915_pm_dc: Add DC9 igt test

["Gupta, Anshuman" <anshuman.gupta@intel.com>]

> -----Original Message-----
> From: Bhatt, Jigar <jigar.bhatt@intel.com>
> Sent: Monday, February 22, 2021 10:17 AM
> To: igt-dev@lists.freedesktop.org
> Cc: Bhatt, Jigar <jigar.bhatt@intel.com>; Gupta, Anshuman
> <anshuman.gupta@intel.com>
> Subject: [PATCH i-g-t v4] tests/i915/i915_pm_dc: Add DC9 igt test
> 
> DC9 igt test validation depends on DC9 Ready and DC{5,6} counters reset.
> When Display Engine enters to DC9, it resets DMC f/w and DC5/DC6 counter.
> We don't have a DC9 counter unlike DC{5,6}, therefore this tests uses DC{5,6}
> counter reset method to validate DC9.
> 
> Signed-off-by: Jigar Bhatt <jigar.bhatt@intel.com>
> ---
>  tests/i915/i915_pm_dc.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c index
> 30c6024..f901400 100644
> --- a/tests/i915/i915_pm_dc.c
> +++ b/tests/i915/i915_pm_dc.c
> @@ -384,6 +384,32 @@ static void test_dc_state_dpms(data_t *data, int
> dc_flag)
>  	cleanup_dc_dpms(data);
>  }
> 
> +static bool check_dc9(uint32_t debugfs_fd, int prev_dc5, int prev_dc6)
> +{
> +        /*
> +         * since we do not have DC9 Counter,
> +         * so we rely on dc5/dc6 counter reset to check if Display Engine was in
> DC9.
> +         */
> +        return igt_wait((read_dc_counter(debugfs_fd,
> +CHECK_DC5)>prev_dc5 || read_dc_counter(debugfs_fd,
> +CHECK_DC6)>prev_dc6),3000,100); } static void test_dc9_dpms(data_t
> +*data) {
> +        require_dc_counter(data->debugfs_fd, CHECK_DC5);
> +        require_dc_counter(data->debugfs_fd, CHECK_DC6);
> +        int dc5_prev=read_dc_counter(data->debugfs_fd, CHECK_DC5);
> +        int dc6_prev=read_dc_counter(data->debugfs_fd, CHECK_DC6);
> +        igt_disable_runtime_pm();
> +        data->runtime_suspend_disabled = true;
> +        dpms_off(data);
You assert here in case dc5/dc6 counters doesn't increase.
Use increased counters for check_dc9 function.
Thanks,
Anshuman Gupta.
> +        dpms_on(data);
> +        data->runtime_suspend_disabled = false;
> +        igt_restore_runtime_pm();
> +        igt_setup_runtime_pm(data->drm_fd);
Keep above code in separate function setup_dc9_dpms()
> +        dpms_off(data);
> +        igt_assert_f(!check_dc9(data->debugfs_fd,dc5_prev,dc6_prev),"Not in
> DC9");
"\n" is missing from the print msg.
> +        dpms_on(data);
> +}
> +
>  IGT_TEST_DESCRIPTION("These tests validate Display Power DC states");  int
> main(int argc, char *argv[])  { @@ -449,6 +475,11 @@ int main(int argc, char
> *argv[])
>  		test_dc_state_dpms(&data, CHECK_DC6);
>  	}
> 
> +	igt_describe("This test validates display engine entry to DC9 state");
> +        igt_subtest("dc9-dpms"){
> +                test_dc9_dpms(&data);
> +        }
> +
>  	igt_fixture {
>  		free(data.pwr_dmn_info);
>  		close(data.debugfs_fd);
> --
> 2.8.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev