Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-media@vger.kernel.org
Cc: Rui Miguel Silva <rmfrfs@gmail.com>,
	Martin Kepplinger <martink@posteo.de>,
	imx@lists.linux.dev, Purism Kernel Team <kernel@puri.sm>
Subject: Re: [PATCH] media: imx-mipi-csis: Use v4l2_subdev_enable_streams()
Date: Thu, 20 Jun 2024 09:34:56 +0300	[thread overview]
Message-ID: <08df0971-8e0d-463e-a128-e9faae68dc30@ideasonboard.com> (raw)
In-Reply-To: <20240619232431.5708-1-laurent.pinchart@ideasonboard.com>

On 20/06/2024 02:24, Laurent Pinchart wrote:
> To support sources that implement the .enable_streams() and
> .disable_streams() operations, replace the manual calls to the subdev
> .s_stream() operation with the v4l2_subdev_enable_streams() and
> v4l2_subdev_disable_streams() helpers. The helpers fall back to
> .s_stream() if the source doesn't implement the new operations, so
> backward compatibility is preserved.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>   drivers/media/platform/nxp/imx-mipi-csis.c | 22 +++++++++++++++-------
>   1 file changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> index f49b06978f14..b9729a8883d6 100644
> --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> @@ -320,7 +320,11 @@ struct mipi_csis_device {
>   	struct v4l2_subdev sd;
>   	struct media_pad pads[CSIS_PADS_NUM];
>   	struct v4l2_async_notifier notifier;
> -	struct v4l2_subdev *src_sd;
> +
> +	struct {
> +		struct v4l2_subdev *sd;
> +		const struct media_pad *pad;
> +	} source;
>   
>   	struct v4l2_mbus_config_mipi_csi2 bus;
>   	u32 clk_frequency;
> @@ -597,7 +601,7 @@ static int mipi_csis_calculate_params(struct mipi_csis_device *csis,
>   	u32 lane_rate;
>   
>   	/* Calculate the line rate from the pixel rate. */
> -	link_freq = v4l2_get_link_freq(csis->src_sd->ctrl_handler,
> +	link_freq = v4l2_get_link_freq(csis->source.sd->ctrl_handler,
>   				       csis_fmt->width,
>   				       csis->bus.num_data_lanes * 2);
>   	if (link_freq < 0) {
> @@ -958,7 +962,8 @@ static int mipi_csis_s_stream(struct v4l2_subdev *sd, int enable)
>   	int ret;
>   
>   	if (!enable) {
> -		v4l2_subdev_call(csis->src_sd, video, s_stream, 0);
> +		v4l2_subdev_disable_streams(csis->source.sd,
> +					    csis->source.pad->index, BIT(0));
>   
>   		mipi_csis_stop_stream(csis);
>   		if (csis->debug.enable)
> @@ -986,7 +991,8 @@ static int mipi_csis_s_stream(struct v4l2_subdev *sd, int enable)
>   
>   	mipi_csis_start_stream(csis, format, csis_fmt);
>   
> -	ret = v4l2_subdev_call(csis->src_sd, video, s_stream, 1);
> +	ret = v4l2_subdev_enable_streams(csis->source.sd,
> +					 csis->source.pad->index, BIT(0));
>   	if (ret < 0)
>   		goto err_stop;
>   
> @@ -1233,12 +1239,14 @@ static int mipi_csis_link_setup(struct media_entity *entity,
>   	remote_sd = media_entity_to_v4l2_subdev(remote_pad->entity);
>   
>   	if (flags & MEDIA_LNK_FL_ENABLED) {
> -		if (csis->src_sd)
> +		if (csis->source.sd)
>   			return -EBUSY;
>   
> -		csis->src_sd = remote_sd;
> +		csis->source.sd = remote_sd;
> +		csis->source.pad = remote_pad;
>   	} else {
> -		csis->src_sd = NULL;
> +		csis->source.sd = NULL;
> +		csis->source.pad = NULL;
>   	}
>   
>   	return 0;
> 
> base-commit: 6ba59ff4227927d3a8530fc2973b80e94b54d58f

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

  Tomi


  reply	other threads:[~2024-06-20  6:35 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-19 23:24 [PATCH] media: imx-mipi-csis: Use v4l2_subdev_enable_streams() Laurent Pinchart
2024-06-20  6:34 ` Tomi Valkeinen [this message]
2024-06-20  9:47 ` Rui Miguel Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=08df0971-8e0d-463e-a128-e9faae68dc30@ideasonboard.com \
    --to=tomi.valkeinen@ideasonboard.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@puri.sm \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=martink@posteo.de \
    --cc=rmfrfs@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox