Re: [PATCH v2 2/5] dt-bindings: arm: fsl: add imx-se-fw binding doc

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 23 May 2024 16:19:33 +0530, Pankaj Gupta wrote:
> The NXP security hardware IP(s) like: i.MX EdgeLock Enclave, V2X etc.,
> creates an embedded secure enclave within the SoC boundary to enable
> features like:
> - HSM
> - SHE
> - V2X
> 
> Secure-Enclave(s) communication interface are typically via message
> unit, i.e., based on mailbox linux kernel driver. This driver enables
> communication ensuring well defined message sequence protocol between
> Application Core and enclave's firmware.
> 
> Driver configures multiple misc-device on the MU, for multiple
> user-space applications, to be able to communicate over single MU.
> 
> It exists on some i.MX processors. e.g. i.MX8ULP, i.MX93 etc.
> 
> Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
> ---
>  .../devicetree/bindings/firmware/fsl,imx-se.yaml   | 154 +++++++++++++++++++++
>  1 file changed, 154 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: /example-2/firmware/v2x-if@0: failed to match any schema with compatible: ['fsl,imx95-v2x']
Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: /example-2/firmware/v2x-if@1: failed to match any schema with compatible: ['fsl,imx95-v2x']
Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: /example-2/firmware/v2x-if@2: failed to match any schema with compatible: ['fsl,imx95-v2x']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240523-imx-se-if-v2-2-5a6fd189a539@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.