From: "Rob Herring (Arm)" <robh@kernel.org>
To: Michael Walle <mwalle@kernel.org>
Cc: linux-kernel@vger.kernel.org,
Sascha Hauer <s.hauer@pengutronix.de>,
Conor Dooley <conor+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Priit Laes <plaes@plaes.org>,
Michael Grzeschik <m.grzeschik@pengutronix.de>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
Marco Felsch <m.felsch@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: Re: [PATCH v2 00/13] ARM: dts: kontron-samx6i: various fixes
Date: Thu, 06 Jun 2024 09:56:16 -0600 [thread overview]
Message-ID: <171768925669.3793237.5164635523857392329.robh@kernel.org> (raw)
In-Reply-To: <20240606090206.2021237-1-mwalle@kernel.org>
On Thu, 06 Jun 2024 11:01:53 +0200, Michael Walle wrote:
> While working on a new PHY support for this board I've noticed quite
> a few errors. Fix these and introduce an actual board for the
> module. For now, there was just a dtsi and no actual user of it.
>
> v2:
> - new patch to fix the node names to make the schema happy
> - new patch to fix the PCIe reset line polarity
> - new patch to remove the unused and invalid wake-up-gpio property
> - add required poperties for the supply voltages to the wm8904 node
> - enable PCIe in the ADS2 device tree include
>
> Michael Walle (13):
> ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode
> ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset
> ARM: dts: imx6qdl-kontron-samx6i: fix board reset
> ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node
> ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects
> ARM: dts: imx6qdl-kontron-samx6i: fix product name
> ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC
> ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support
> ARM: dts: imx6qdl-kontron-samx6i: fix node names
> ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity
> ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property
> dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards
> ARM: dts: imx6qdl-kontron-samx6i: add actual device trees
>
> .../devicetree/bindings/arm/fsl.yaml | 12 ++
> arch/arm/boot/dts/nxp/imx/Makefile | 2 +
> .../nxp/imx/imx6dl-kontron-samx6i-ads2.dts | 12 ++
> .../dts/nxp/imx/imx6dl-kontron-samx6i.dtsi | 2 +-
> .../dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts | 12 ++
> .../dts/nxp/imx/imx6q-kontron-samx6i.dtsi | 25 +--
> .../nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi | 148 ++++++++++++++++++
> .../dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi | 58 ++++---
> 8 files changed, 225 insertions(+), 46 deletions(-)
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
>
> --
> 2.39.2
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y nxp/imx/imx6dl-kontron-samx6i-ads2.dtb nxp/imx/imx6q-kontron-samx6i-ads2.dtb' for 20240606090206.2021237-1-mwalle@kernel.org:
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /ldb: failed to match any schema with compatible: ['fsl,imx6q-ldb', 'fsl,imx53-ldb']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /ldb: failed to match any schema with compatible: ['fsl,imx6q-ldb', 'fsl,imx53-ldb']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /ldb: failed to match any schema with compatible: ['fsl,imx6q-ldb', 'fsl,imx53-ldb']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /ldb: failed to match any schema with compatible: ['fsl,imx6q-ldb', 'fsl,imx53-ldb']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: iomuxc-gpr@20e0000: 'ipu1_csi0_mux', 'ipu1_csi1_mux' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: iomuxc-gpr@20e0000: 'ipu1_csi0_mux', 'ipu2_csi1_mux' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6dl-iomuxc']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6q-iomuxc']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /soc/bus@2100000/mipi@21dc000: failed to match any schema with compatible: ['fsl,imx6-mipi-csi2']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /soc/bus@2100000/mipi@21dc000: failed to match any schema with compatible: ['fsl,imx6-mipi-csi2']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /soc/bus@2100000/vdoa@21e4000: failed to match any schema with compatible: ['fsl,imx6q-vdoa']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /soc/bus@2100000/vdoa@21e4000: failed to match any schema with compatible: ['fsl,imx6q-vdoa']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /soc/ipu@2400000: failed to match any schema with compatible: ['fsl,imx6q-ipu']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /soc/ipu@2400000: failed to match any schema with compatible: ['fsl,imx6q-ipu']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /soc/ipu@2800000: failed to match any schema with compatible: ['fsl,imx6q-ipu']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /capture-subsystem: failed to match any schema with compatible: ['fsl,imx-capture-subsystem']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /display-subsystem: failed to match any schema with compatible: ['fsl,imx-display-subsystem']
arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dtb: /lcd: failed to match any schema with compatible: ['fsl,imx-parallel-display']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /capture-subsystem: failed to match any schema with compatible: ['fsl,imx-capture-subsystem']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /display-subsystem: failed to match any schema with compatible: ['fsl,imx-display-subsystem']
arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dtb: /lcd: failed to match any schema with compatible: ['fsl,imx-parallel-display']
prev parent reply other threads:[~2024-06-06 15:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-06 9:01 [PATCH v2 00/13] ARM: dts: kontron-samx6i: various fixes Michael Walle
2024-06-06 9:01 ` [PATCH v2 01/13] ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode Michael Walle
2024-06-17 1:39 ` Shawn Guo
2024-06-06 9:01 ` [PATCH v2 02/13] ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset Michael Walle
2024-06-06 9:01 ` [PATCH v2 03/13] ARM: dts: imx6qdl-kontron-samx6i: fix board reset Michael Walle
2024-06-17 1:39 ` Shawn Guo
2024-06-06 9:01 ` [PATCH v2 04/13] ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node Michael Walle
2024-06-06 9:01 ` [PATCH v2 05/13] ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects Michael Walle
2024-06-06 9:01 ` [PATCH v2 06/13] ARM: dts: imx6qdl-kontron-samx6i: fix product name Michael Walle
2024-06-06 9:02 ` [PATCH v2 07/13] ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC Michael Walle
2024-06-06 9:02 ` [PATCH v2 08/13] ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support Michael Walle
2024-06-17 1:40 ` Shawn Guo
2024-06-06 9:02 ` [PATCH v2 09/13] ARM: dts: imx6qdl-kontron-samx6i: fix node names Michael Walle
2024-06-17 1:41 ` Shawn Guo
2024-06-06 9:02 ` [PATCH v2 10/13] ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity Michael Walle
2024-06-06 9:02 ` [PATCH v2 11/13] ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property Michael Walle
2024-06-06 9:02 ` [PATCH v2 12/13] dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards Michael Walle
2024-06-06 9:02 ` [PATCH v2 13/13] ARM: dts: imx6qdl-kontron-samx6i: add actual device trees Michael Walle
2024-06-17 1:51 ` Shawn Guo
2024-06-06 15:56 ` Rob Herring (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=171768925669.3793237.5164635523857392329.robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=m.grzeschik@pengutronix.de \
--cc=mwalle@kernel.org \
--cc=plaes@plaes.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox