Re: [PATCH v3 net-next 0/3] net: enetc: add port MDIO support for both i.MX94 and i.MX95

[patchwork-bot+netdevbpf@kernel.org]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Wed, 19 Nov 2025 18:25:54 +0800 you wrote:
> The NETC IP has one external master MDIO interface (eMDIO) for managing
> external PHYs, all ENETC ports share this eMDIO. The EMDIO function and
> the ENETC port MDIO are the virtual ports of this eMDIO, ENETC can use
> these virtual ports to access their PHYs. The difference is that EMDIO
> function is a 'global port', it can access all the PHYs on the eMDIO, so
> it provides a means for different software modules to share a single set
> of MDIO signals to access their PHYs.
> 
> [...]

Here is the summary with links:
  - [v3,net-next,1/3] net: enetc: set the external PHY address in IERB for port MDIO usage
    https://git.kernel.org/netdev/net-next/c/6633df05f3ad
  - [v3,net-next,2/3] net: enetc: set external PHY address in IERB for i.MX94 ENETC
    https://git.kernel.org/netdev/net-next/c/50bfd9c06f0f
  - [v3,net-next,3/3] net: enetc: update the base address of port MDIO registers for ENETC v4
    https://git.kernel.org/netdev/net-next/c/10ba23a7f6cc

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html