From: Frank Li <Frank.Li@nxp.com>
To: manivannan.sadhasivam@linaro.org
Cc: Frank.Li@nxp.com, bhelgaas@google.com, imx@lists.linux.dev,
kw@linux.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, lpieralisi@kernel.org,
minghuan.Lian@nxp.com, mingkai.hu@nxp.com, robh@kernel.org,
roy.zang@nxp.com
Subject: [PATCH v6 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*
Date: Mon, 4 Dec 2023 11:08:28 -0500 [thread overview]
Message-ID: <20231204160829.2498703-4-Frank.Li@nxp.com> (raw)
In-Reply-To: <20231204160829.2498703-1-Frank.Li@nxp.com>
'pf' and 'lut' is just difference name in difference chips, but basic it is
a MMIO base address plus an offset.
Rename it to avoid duplicate pf_* and lut_* in driver.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Notes:
pf_lut is better than pf_* or lut* because some chip use 'pf', some chip
use 'lut'.
Change from v5 to v6
move to previous patch
-> - .ops = &ls_pcie_host_ops;
> + .ops = &ls_pcie_host_ops,
Change from v4 to v5
- rename layerscape-ep code also
change from v1 to v4
- new patch at v3
.../pci/controller/dwc/pci-layerscape-ep.c | 16 ++++-----
drivers/pci/controller/dwc/pci-layerscape.c | 34 +++++++++----------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index 3d3c50ef4b6ff..2ca339f938a86 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -49,7 +49,7 @@ struct ls_pcie_ep {
bool big_endian;
};
-static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
{
struct dw_pcie *pci = pcie->pci;
@@ -59,7 +59,7 @@ static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
return ioread32(pci->dbi_base + offset);
}
-static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
+static void ls_pcie_pf_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
{
struct dw_pcie *pci = pcie->pci;
@@ -76,8 +76,8 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
u32 val, cfg;
u8 offset;
- val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
- ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
+ val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_DR);
+ ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
if (!val)
return IRQ_NONE;
@@ -96,9 +96,9 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
dw_pcie_dbi_ro_wr_dis(pci);
- cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
+ cfg = ls_pcie_pf_lut_readl(pcie, PEX_PF0_CONFIG);
cfg |= PEX_PF0_CFG_READY;
- ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
+ ls_pcie_pf_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
dw_pcie_ep_linkup(&pci->ep);
dev_dbg(pci->dev, "Link up\n");
@@ -130,10 +130,10 @@ static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
}
/* Enable interrupts */
- val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
+ val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_IER);
val |= PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
PEX_PF0_PME_MES_IER_LUDIE;
- ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
+ ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
return 0;
}
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 711563777aeba..f3dfb70066fb7 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -44,7 +44,7 @@
#define PCIE_IATU_NUM 6
struct ls_pcie_drvdata {
- const u32 pf_off;
+ const u32 pf_lut_off;
const struct dw_pcie_host_ops *ops;
int (*exit_from_l2)(struct dw_pcie_rp *pp);
bool scfg_support;
@@ -54,13 +54,13 @@ struct ls_pcie_drvdata {
struct ls_pcie {
struct dw_pcie *pci;
const struct ls_pcie_drvdata *drvdata;
- void __iomem *pf_base;
+ void __iomem *pf_lut_base;
struct regmap *scfg;
int index;
bool big_endian;
};
-#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr)
+#define ls_pcie_pf_lut_readl_addr(addr) ls_pcie_pf_lut_readl(pcie, addr)
#define to_ls_pcie(x) dev_get_drvdata((x)->dev)
static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
@@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
}
-static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
{
if (pcie->big_endian)
- return ioread32be(pcie->pf_base + off);
+ return ioread32be(pcie->pf_lut_base + off);
- return ioread32(pcie->pf_base + off);
+ return ioread32(pcie->pf_lut_base + off);
}
-static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
+static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
{
if (pcie->big_endian)
- iowrite32be(val, pcie->pf_base + off);
+ iowrite32be(val, pcie->pf_lut_base + off);
else
- iowrite32(val, pcie->pf_base + off);
+ iowrite32(val, pcie->pf_lut_base + off);
}
static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
@@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
u32 val;
int ret;
- val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+ val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
val |= PF_MCR_PTOMR;
- ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+ ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
- ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+ ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
val, !(val & PF_MCR_PTOMR),
PCIE_PME_TO_L2_TIMEOUT_US/10,
PCIE_PME_TO_L2_TIMEOUT_US);
@@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
* Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
* to exit L2 state.
*/
- val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+ val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
val |= PF_MCR_EXL2S;
- ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+ ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
/*
* L2 exit timeout of 10ms is not defined in the specifications,
* it was chosen based on empirical observations.
*/
- ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+ ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
val, !(val & PF_MCR_EXL2S),
1000,
10000);
@@ -242,7 +242,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
};
static const struct ls_pcie_drvdata layerscape_drvdata = {
- .pf_off = 0xc0000,
+ .pf_lut_off = 0xc0000,
.pm_support = true,
.ops = &ls_pcie_host_ops,
.exit_from_l2 = ls_pcie_exit_from_l2,
@@ -291,7 +291,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
- pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
+ pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
if (pcie->drvdata->scfg_support) {
pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
--
2.34.1
next prev parent reply other threads:[~2023-12-04 16:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-04 16:08 [PATCH v6 0/4] PCI: layerscape: Add suspend/resume support for ls1043 and ls1021 Frank Li
2023-12-04 16:08 ` [PATCH v6 1/4] PCI: layerscape: Add function pointer for exit_from_l2() Frank Li
2023-12-04 16:08 ` [PATCH v6 2/4] PCI: layerscape: Add suspend/resume for ls1021a Frank Li
2023-12-04 16:08 ` Frank Li [this message]
2023-12-04 16:08 ` [PATCH v6 4/4] PCI: layerscape: Add suspend/resume for ls1043a Frank Li
2023-12-11 22:06 ` Frank Li
2023-12-12 10:18 ` [PATCH v6 0/4] PCI: layerscape: Add suspend/resume support for ls1043 and ls1021 Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231204160829.2498703-4-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=imx@lists.linux.dev \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=minghuan.Lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh@kernel.org \
--cc=roy.zang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox