[PATCH v4 4/6] perf: imx_perf: add macro definitions for parsing config attr

[Xu Yang <xu.yang_2@nxp.com>]

The user can set event and counter in cmdline and the driver need to parse
it using 'config' attr value. This will add macro definitions to avoid
hard-code in driver.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v4:
 - new patch
---
 drivers/perf/fsl_imx9_ddr_perf.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/perf/fsl_imx9_ddr_perf.c b/drivers/perf/fsl_imx9_ddr_perf.c
index 85aaaef7212f..94041f06c152 100644
--- a/drivers/perf/fsl_imx9_ddr_perf.c
+++ b/drivers/perf/fsl_imx9_ddr_perf.c
@@ -52,6 +52,11 @@
 #define NUM_COUNTERS		11
 #define CYCLES_COUNTER		0
 
+#define CONFIG_EVENT_MASK	0x00FF
+#define CONFIG_EVENT_OFFSET	0
+#define CONFIG_COUNTER_MASK	0xFF00
+#define CONFIG_COUNTER_OFFSET	8
+
 #define to_ddr_pmu(p)		container_of(p, struct ddr_pmu, pmu)
 
 #define DDR_PERF_DEV_NAME	"imx9_ddr"
@@ -381,8 +386,10 @@ static void ddr_perf_counter_local_config(struct ddr_pmu *pmu, int config,
 				    int counter, bool enable)
 {
 	u32 ctrl_a;
+	int event;
 
 	ctrl_a = readl_relaxed(pmu->base + PMLCA(counter));
+	event = (config & CONFIG_EVENT_MASK) >> CONFIG_EVENT_OFFSET;
 
 	if (enable) {
 		ctrl_a |= PMLCA_FC;
@@ -394,7 +401,7 @@ static void ddr_perf_counter_local_config(struct ddr_pmu *pmu, int config,
 		ctrl_a &= ~PMLCA_FC;
 		ctrl_a |= PMLCA_CE;
 		ctrl_a &= ~FIELD_PREP(PMLCA_EVENT, 0x7F);
-		ctrl_a |= FIELD_PREP(PMLCA_EVENT, (config & 0x000000FF));
+		ctrl_a |= FIELD_PREP(PMLCA_EVENT, event);
 		writel(ctrl_a, pmu->base + PMLCA(counter));
 	} else {
 		/* Freeze counter. */
@@ -408,8 +415,8 @@ static void imx93_ddr_perf_monitor_config(struct ddr_pmu *pmu, int cfg, int cfg1
 	u32 pmcfg1, pmcfg2;
 	int event, counter;
 
-	event = cfg & 0x000000FF;
-	counter = (cfg & 0x0000FF00) >> 8;
+	event = (cfg & CONFIG_EVENT_MASK) >> CONFIG_EVENT_OFFSET;
+	counter = (cfg & CONFIG_COUNTER_MASK) >> CONFIG_COUNTER_OFFSET;
 
 	pmcfg1 = readl_relaxed(pmu->base + PMCFG1);
 
@@ -443,8 +450,8 @@ static void imx95_ddr_perf_monitor_config(struct ddr_pmu *pmu, int cfg, int cfg1
 	u32 pmcfg1, pmcfg, offset = 0;
 	int event, counter;
 
-	event = cfg & 0x000000FF;
-	counter = (cfg & 0x0000FF00) >> 8;
+	event = (cfg & CONFIG_EVENT_MASK) >> CONFIG_EVENT_OFFSET;
+	counter = (cfg & CONFIG_COUNTER_MASK) >> CONFIG_COUNTER_OFFSET;
 
 	pmcfg1 = readl_relaxed(pmu->base + PMCFG1);
 
@@ -561,7 +568,7 @@ static int ddr_perf_event_add(struct perf_event *event, int flags)
 	int cfg2 = event->attr.config2;
 	int counter;
 
-	counter = (cfg & 0x0000FF00) >> 8;
+	counter = (cfg & CONFIG_COUNTER_MASK) >> CONFIG_COUNTER_OFFSET;
 
 	pmu->events[counter] = event;
 	pmu->active_events++;
-- 
2.34.1