From: Frank Li <Frank.Li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 1/1] ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
Date: Wed, 21 Feb 2024 17:15:09 -0500 [thread overview]
Message-ID: <20240221221510.3762096-1-Frank.Li@nxp.com> (raw)
From: Li Yang <leoyang.li@nxp.com>
Enable USB3 HW LPM feature.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm/boot/dts/nxp/ls/ls1021a.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index 95e2057d9213c..e86998ca77d6e 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -808,6 +808,7 @@ usb3: usb@3100000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
snps,host-vbus-glitches;
};
--
2.34.1
next reply other threads:[~2024-02-21 22:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 22:15 Frank Li [this message]
2024-02-25 13:01 ` [PATCH 1/1] ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240221221510.3762096-1-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox