From: Shawn Guo <shawnguo2@yeah.net>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 3/5] i.MX ARM device tree for 6.9
Date: Mon, 26 Feb 2024 11:41:44 +0800 [thread overview]
Message-ID: <20240226034147.233993-3-shawnguo2@yeah.net> (raw)
In-Reply-To: <20240226034147.233993-1-shawnguo2@yeah.net>
From: Shawn Guo <shawnguo@kernel.org>
The following changes since commit 6613476e225e090cc9aad49be7fa504e290dd33d:
Linux 6.8-rc1 (2024-01-21 14:11:32 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-6.9
for you to fetch changes up to ccda9e5c365f6c4c3af5fda9c15cce3779cb2bbe:
ARM: dts: nxp: imx: fix weim node name (2024-02-26 09:35:07 +0800)
----------------------------------------------------------------
i.MX ARM device tree for 6.9:
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
----------------------------------------------------------------
Alexander Stein (24):
ARM: dts: imx7-tqma7/mba7: convert fsl,pins to uint32-matrix
ARM: dts: imx7[d]-mba7: Move ethernet PHY reset into PHY node
ARM: dts: imx7[d]-mba7: disable USB OC on USB host and USB OTG2
ARM: dts: imx7[d]-mba7: disable PCIe interface
ARM: dts: imx7[d]-mba7: hog Mini PCIe signals
ARM: dts: imx7-mba7: Mark gpio-buttons as wakeup-source
ARM: dts: imx7-mba7: Enable SNVS power key
ARM: dts: imx7-mba7: Add RTC aliases
ARM: dts: imx7-mba7: Add SPI1_SS0 as chip select 3
ARM: dts: imx7-tqma7: Add i2c bus recovery
ARM: dts: imx7-mba7: Add i2c bus recovery
ARM: dts: imx7-tqma7: fix EEPROM compatible for SE97BTP
ARM: dts: imx7-mba7: Fix iomuxc node names
ARM: dts: imx7-tqma7: Fix iomuxc node names
ARM: dts: imx7-mba7: restrict usdhc interface modes
ARM: dts: imx7-tqma7: restrict usdhc interface modes
ARM: dts: imx7-tqma7: remove superfluous status property
ARM: dts: imx7-tqma7: mark system data eeprom as read-only
ARM: dts: imx7-tqma7: rename node for SE97BTP
ARM: dts: imx7d-mba7: Remove USB OTG related properties on USB node
ARM: dts: imx7-tqma7: Add missing vcc supply to i2c eeproms
ARM: dts: imx7-mba7: Add missing vcc supply to i2c devices
ARM: dts: imx7-tqma7: Fix PMIC v33 rail voltage range
ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
Andreas Kemnade (1):
ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
Christoph Niedermaier (2):
ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq
Dmitry Baryshkov (1):
ARM: dts: imx53-qsb: add support for the HDMI expander
Fabio Estevam (2):
ARM: dts: imx28-evk: Use 'eeprom' as the node name
ARM: dts: imx1-apf9328: Fix Ethernet node name
Frieder Schrempf (1):
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
Hiago De Franco (1):
ARM: dts: imx: Add support for Apalis Evaluation Board v1.2
Josua Mayer (1):
ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
Li Yang (1):
ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
Manuel Traut (1):
ARM: dts: imx6ul: Set macaddress location in ocotp
Michal Vokáč (2):
ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
Oleksij Rempel (1):
ARM: dts: imx6: skov: add aliases for all ethernet nodes
Sebastian Reichel (5):
ARM: dts: imx6ull: fix pinctrl node name
ARM: dts: imx6ul: Remove fsl,anatop from usbotg1
ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
ARM: dts: nxp: imx6ul: fix touchscreen node name
ARM: dts: nxp: imx: fix weim node name
arch/arm/boot/dts/nxp/imx/Makefile | 6 +
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx1.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx27.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx31.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx35.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx51.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso | 87 ++++
arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts | 533 +++++++++++++++++++++
arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 25 +-
.../boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts | 200 ++++++++
arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts | 108 +----
arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi | 120 +++++
.../arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi | 7 +-
.../boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi | 5 +
arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi | 10 +-
arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi | 2 +-
.../boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 6 +-
arch/arm/boot/dts/nxp/imx/imx6sl.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6sx.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts | 2 +-
.../dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul.dtsi | 18 +-
.../dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi | 7 +-
arch/arm/boot/dts/nxp/imx/imx6ull.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 325 +++++++------
arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 144 +++---
arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts | 94 ++--
arch/arm/boot/dts/nxp/ls/ls1021a.dtsi | 1 +
arch/arm/boot/dts/nxp/mxs/imx28-evk.dts | 2 +-
33 files changed, 1338 insertions(+), 394 deletions(-)
create mode 100644 arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
next prev parent reply other threads:[~2024-02-26 3:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-26 3:41 [GIT PULL 1/5] i.MX SoC changes for 6.9 Shawn Guo
2024-02-26 3:41 ` [GIT PULL 2/5] i.MX dt-bindings " Shawn Guo
2024-02-26 3:41 ` Shawn Guo [this message]
2024-02-26 3:41 ` [GIT PULL 4/5] i.MX arm64 device tree " Shawn Guo
2024-02-26 3:41 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240226034147.233993-3-shawnguo2@yeah.net \
--to=shawnguo2@yeah.net \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=shawnguo@kernel.org \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox