[PATCH v5 0/5] dt-bindings: pci: layerscape-pci: Convert to yaml format

[Frank Li <Frank.Li@nxp.com>]

Change from
    Change from v4 to v5
    - split 5 patch.
    - create one base patch, which the same as original txt.
    - two patch fix for RC.
    - two patch fix for EP.

    Change from v3 to v4
    - remove ep label
    - remove status="disabled"
    - remove deprecated property
    - fixed irq max-numbers
    - because dts still use "reg" instead "dbi", to avoid dtb check warning,
    not referernece to snps,dwc-pcie yet.

    Change from v2 to v3
    - update commit message, show change compare txt file
    - add failback compatible fsl,ls-pcie-ep.
    - add commit message about 'addr_space' and 'config'.

    Change from v1 to v2
    - remove '|-'
    - dma-coherent: true
    - add interrupts and interrupt-names at before Allof
    - remove ref to snps,pcie*.yaml, some reg-names are not aligned with in
    drivers
    - Add an example for pcie-ep

Frank Li (5):
  dt-bindings: pci: layerscape-pci: Convert to yaml format
  dt-bindings: pci: layerscape-pci: Add snps,dw-pcie.yaml reference
  dt-bindings: pci: layerscape-pci: Remove 'fsl,pcie-scfg' and
    'dma-coherence' from required
  dt-bindings: pci: layerscape-pci-ep: Add snps,dw-pcie-ep.yaml
    reference
  dt-bindings: pci: layerscape-pci-ep: Remove 'fsl,pcie-scfg' and
    'dma-coherence' from required

 .../bindings/pci/fsl,layerscape-pcie-ep.yaml  |  91 +++++++++
 .../bindings/pci/fsl,layerscape-pcie.yaml     | 173 ++++++++++++++++++
 .../bindings/pci/layerscape-pci.txt           |  79 --------
 3 files changed, 264 insertions(+), 79 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
 delete mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt

-- 
2.34.1