[PATCH 1/1] arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order

[Frank Li <Frank.Li@nxp.com>]

The actual clock show wrong frequency:

   echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
   cat /sys/kernel/debug/mmc0/ios

   clock:          200000000 Hz
   actual clock:   166000000 Hz
                   ^^^^^^^^^
   .....

According to

sdhc0_lpcg: clock-controller@5b200000 {
                compatible = "fsl,imx8qxp-lpcg";
                reg = <0x5b200000 0x10000>;
                #clock-cells = <1>;
                clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
                         <&conn_ipg_clk>, <&conn_axi_clk>;
                clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
                                <IMX_LPCG_CLK_5>;
                clock-output-names = "sdhc0_lpcg_per_clk",
                                     "sdhc0_lpcg_ipg_clk",
                                     "sdhc0_lpcg_ahb_clk";
                power-domains = <&pd IMX_SC_R_SDHC_0>;
        }

"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.

After correct clocks order:

   echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
   cat /sys/kernel/debug/mmc0/ios

   clock:          200000000 Hz
   actual clock:   198000000 Hz
                   ^^^^^^^^
   ...

Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 3c42240e78e24..af2259e997967 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -67,8 +67,8 @@ usdhc1: mmc@5b010000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ usdhc2: mmc@5b020000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ usdhc3: mmc@5b030000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
-- 
2.34.1