[PATCH v4 0/8] arm64: dts: convert fsl,esdhc.txt to yaml and fix layerscape dts warning

[Frank Li <Frank.Li@nxp.com>]

Start from v4 because fsl.esdhc.txt to yaml already sent out as v3.

Change from v3 to v4
- Add dts warning fixes
- Add mmc-spi-slot's voltage range fix, (not sure why it apply to
layserscape's dts file.
- clock-frequency is not required property
- add dma-conherence: true in binding doc

Now only "bit-endian" proptery warning left.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Frank Li (8):
      dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
      dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
      arm64: dts: ls1012a: Chang node name from 'esdhc' to 'mmc'
      arm64: dts: ls1043a: Chang node name from 'esdhc' to 'mmc'
      arm64: dts: ls1046a: Chang node name from 'esdhc' to 'mmc'
      arm64: dts: ls1088a: Chang node name from 'esdhc' to 'mmc'
      arm64: dts: ls208ax: Chang node name from 'esdhc' to 'mmc'
      arm64: dts: lx2160a: Chang node name from 'esdhc' to 'mmc'

 .../devicetree/bindings/mmc/fsl,esdhc.yaml         | 105 +++++++++++++++++++++
 .../devicetree/bindings/mmc/fsl-esdhc.txt          |  52 ----------
 .../devicetree/bindings/mmc/mmc-spi-slot.yaml      |  17 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     |   4 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi     |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |   2 +-
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |   8 +-
 9 files changed, 125 insertions(+), 69 deletions(-)
---
base-commit: d35b2284e966c0bef3e2182a5c5ea02177dd32e4
change-id: 20240610-ls_waring_esdhc-93136a5dd794

Best regards,
---
Frank Li <Frank.Li@nxp.com>