From: Frank Li <Frank.Li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 2/3] arm64: dts: layerscape: rename rcpm as wakeup-control from power-control
Date: Fri, 28 Jun 2024 10:28:07 -0400 [thread overview]
Message-ID: <20240628142809.2327824-2-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240628142809.2327824-1-Frank.Li@nxp.com>
Invoke power-domain.yaml if node name as 'power-control'.
Rcpm actually are not power domain controller. It just control wakeup
capability. So rename it as wakeup-control. Fix below CHECK_DTBS warning.
power-controller@1ee2140: '#power-domain-cells' is a required property
from schema $id: http://devicetree.org/schemas/power/power-domain.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index e61ea7e0737e4..dfd245b326a0d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -556,7 +556,7 @@ pcie1: pcie@3400000 {
status = "disabled";
};
- rcpm: power-controller@1ee2140 {
+ rcpm: wakeup-controller@1ee2140 {
compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x4>;
#fsl,rcpm-wakeup-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 6b6e3ee950e53..24e86abe88ea1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1319,7 +1319,7 @@ pwm7: pwm@2870000 {
status = "disabled";
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
#fsl,rcpm-wakeup-cells = <7>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index b19a024525cbc..c176d36f68437 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -983,7 +983,7 @@ qdma: dma-controller@8380000 {
big-endian;
};
- rcpm: power-controller@1ee2140 {
+ rcpm: wakeup-controller@1ee2140 {
compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x4>;
#fsl,rcpm-wakeup-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 6e244dc4832d1..baf9cb90ba8e7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -935,7 +935,7 @@ qdma: dma-controller@8380000 {
big-endian;
};
- rcpm: power-controller@1ee2140 {
+ rcpm: wakeup-controller@1ee2140 {
compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x4>;
#fsl,rcpm-wakeup-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8ce4b6aae79d4..c980f4c5dcfdc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -1033,7 +1033,7 @@ dpmac10: ethernet@a {
};
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index bde89de2576e1..8691117ffcf76 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1218,7 +1218,7 @@ ccn@4000000 {
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 26c7ca31e22e7..73ee45acfde13 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1078,7 +1078,7 @@ watchdog@23a0000 {
timeout-sec = <30>;
};
- rcpm: power-controller@1e34040 {
+ rcpm: wakeup-controller@1e34040 {
compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
#fsl,rcpm-wakeup-cells = <7>;
--
2.34.1
next prev parent reply other threads:[~2024-06-28 14:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-28 14:28 [PATCH 1/3] arm64: dts: layerscape: rename aux-bus to bus Frank Li
2024-06-28 14:28 ` Frank Li [this message]
2024-06-28 14:28 ` [PATCH 3/3] arm64: dts: layerscape: use common pcs-handle property Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240628142809.2327824-2-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox