From: Frank Li <Frank.Li@nxp.com>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Olof Johansson" <olof@lixom.net>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
"Frank Li" <Frank.Li@nxp.com>
Subject: [PATCH 2/3] arm64: dts: fsl-lx2160a: add rev2 support
Date: Mon, 26 Aug 2024 17:38:33 -0400 [thread overview]
Message-ID: <20240826-2160r2-v1-2-106340d538d6@nxp.com> (raw)
In-Reply-To: <20240826-2160r2-v1-0-106340d538d6@nxp.com>
Add rev2 dtsi. Although uboot fixup can change compatible string
fsl,lx2160a-pcie to fsl,ls2088a-pcie since 2019, it is quite confused and
should correctly reflect hardware status. So add fsl-lx2160a-rev2.dtsi to
overwrite pcie's compatible string.
Add PCIe EP nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi | 170 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 2 +-
2 files changed, 171 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi
new file mode 100644
index 0000000000000..432e54f6f7ae5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160 REV2
+//
+// Copyright 2025 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+&pcie1 {
+ compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+
+ ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+
+ /delete-property/ apio-wins;
+ /delete-property/ ppio-wins;
+};
+
+&pcie2 {
+ compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+
+ ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>;
+
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+
+ /delete-property/ apio-wins;
+ /delete-property/ ppio-wins;
+};
+
+&pcie3 {
+ compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x90 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+
+ ranges = <0x81000000 0x0 0x00000000 0x90 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>;
+
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+
+ /delete-property/ apio-wins;
+ /delete-property/ ppio-wins;
+};
+
+
+&pcie4 {
+ compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x98 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+
+ ranges = <0x81000000 0x0 0x00000000 0x98 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>;
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+
+ /delete-property/ apio-wins;
+ /delete-property/ ppio-wins;
+};
+
+&pcie5 {
+ compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+ reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */
+ 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+
+ ranges = <0x81000000 0x0 0x00000000 0xa0 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>;
+
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+
+ /delete-property/ apio-wins;
+ /delete-property/ ppio-wins;
+};
+
+&pcie6 {
+ compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+ reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */
+ 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+
+ ranges = <0x81000000 0x0 0x00000000 0xa8 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>;
+
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+
+ /delete-property/ apio-wins;
+ /delete-property/ ppio-wins;
+};
+
+&soc {
+ pcie_ep1: pcie-ep@3400000 {
+ compatible = "fsl,lx2160ar2-pcie-ep";
+ reg = <0x00 0x03400000 0x0 0x00100000
+ 0x80 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
+ pcie_ep2: pcie-ep@3500000 {
+ compatible = "fsl,lx2160ar2-pcie-ep";
+ reg = <0x00 0x03500000 0x0 0x00100000
+ 0x88 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
+ pcie_ep3: pcie-ep@3600000 {
+ compatible = "fsl,lx2160ar2-pcie-ep";
+ reg = <0x00 0x03600000 0x0 0x00100000
+ 0x90 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <256>;
+ num-ib-windows = <24>;
+ status = "disabled";
+ };
+
+ pcie_ep4: pcie-ep@3700000 {
+ compatible = "fsl,lx2160ar2-pcie-ep";
+ reg = <0x00 0x03700000 0x0 0x00100000
+ 0x98 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
+
+ pcie_ep5: pcie-ep@3800000 {
+ compatible = "fsl,lx2160ar2-pcie-ep";
+ reg = <0x00 0x03800000 0x0 0x00100000
+ 0xa0 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <256>;
+ num-ib-windows = <24>;
+ status = "disabled";
+ };
+
+ pcie_ep6: pcie-ep@3900000 {
+ compatible = "fsl,lx2160ar2-pcie-ep";
+ reg = <0x00 0x03900000 0x0 0x00100000
+ 0xa8 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+};
+
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 26c7ca31e22e7..b2dea03e1b8ec 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -613,7 +613,7 @@ cluster2-3-crit {
};
};
- soc {
+ soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
--
2.34.1
next prev parent reply other threads:[~2024-08-26 21:39 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-26 21:38 [PATCH 0/3] arm64: dts: PCI: lx2160 use fsl,lx2160ar2-pcie Frank Li
2024-08-26 21:38 ` [PATCH 1/3] dt-bindings: PCI: layerscape-pci: Replace fsl,lx2160a-pcie with fsl,lx2160ar2-pcie Frank Li
2024-08-27 16:07 ` Rob Herring (Arm)
2024-08-27 16:14 ` Conor Dooley
2024-08-27 16:32 ` Frank Li
2024-08-27 16:56 ` Conor Dooley
2024-09-04 14:46 ` Krzysztof Wilczyński
2024-08-26 21:38 ` Frank Li [this message]
2024-10-16 16:24 ` [PATCH 2/3] arm64: dts: fsl-lx2160a: add rev2 support Frank Li
2024-10-18 3:03 ` Shawn Guo
2024-08-26 21:38 ` [PATCH 3/3] arm64: dts: fsl-lx2160a: include rev2 chip's dts Frank Li
2025-09-23 11:10 ` Vladimir Oltean
2025-10-20 9:32 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240826-2160r2-v1-2-106340d538d6@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=olof@lixom.net \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox