From: Shawn Guo <shawnguo2@yeah.net>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
kernel@pengutronix.de, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 4/6] i.MX ARM device tree changes for 6.12
Date: Wed, 4 Sep 2024 22:34:37 +0800 [thread overview]
Message-ID: <20240904143439.211552-4-shawnguo2@yeah.net> (raw)
In-Reply-To: <20240904143439.211552-1-shawnguo2@yeah.net>
From: Shawn Guo <shawnguo@kernel.org>
The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b:
Linux 6.11-rc1 (2024-07-28 14:19:55 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-6.12
for you to fetch changes up to c30f4711b8bf938c447750f31eb6ad00a67782b1:
ARM: dts: imx28-lwe: Remove saif[01] definitions (2024-09-03 16:23:20 +0800)
----------------------------------------------------------------
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
----------------------------------------------------------------
Elinor Montmasson (1):
ARM: dts: imx6: update spdif sound card node properties
Fabio Estevam (5):
ARM: dts: imx6sx-udoo-neo: Properly configure ENET_REF
ARM: dts: imx1/imx27: Use dma-controller as node name
ARM: dts: imx28-apx4devkit: Fix the regulator description
ARM: dts: imx23/8: Rename apbh and apbx nodes
ARM: dts: imx28-tx28: Fix the fsl,saif-master usage
Krzysztof Kozlowski (10):
MAINTAINERS: correct TQ Systems DTS patterns
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
ARM: dts: imx7: align pin config nodes with bindings
ARM: dts: imx7d-sdb: align pin config nodes with bindings
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder
ARM: dts: imx6ul: align pin config nodes with bindings
ARM: dts: imx6sl: align pin config nodes with bindings
ARM: dts: imx6qdl: align pin config nodes with bindings
Liu Ying (2):
ARM: dts: imx53-qsb-hdmi: Do not disable TVE
ARM: dts: imx53-qsb-hdmi: Merge display0 node
Lukasz Majewski (3):
ARM: dts: imx28-lwe: Fix partitions definitions
ARM: dts: imx28-lwe: Reduce maximal SPI frequency
ARM: dts: imx28-lwe: Remove saif[01] definitions
Markus Niebel (6):
ARM: dts: imx7-mba7: add iio-hwmon support
ARM: dts: imx7-mba7: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
MAINTAINERS | 5 +-
arch/arm/boot/dts/nxp/imx/imx1.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx27.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso | 6 -
arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts | 15 +-
arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts | 15 +-
arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts | 9 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 15 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi | 9 +-
.../boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 15 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi | 9 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi | 10 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi | 4 +-
.../arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi | 9 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi | 8 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi | 11 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi | 13 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi | 14 -
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi | 20 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi | 9 +-
arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts | 12 +-
arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts | 8 +-
arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts | 9 +-
arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 9 +-
arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi | 5 +
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 4 +-
.../boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts | 4 +-
.../arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts | 14 +-
arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts | 6 +-
arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi | 4 +-
.../boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts | 2 +-
.../nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi | 4 +-
arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi | 6 +-
.../boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi | 2 +-
.../boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi | 18 +-
.../boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi | 8 +-
.../dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi | 20 +-
arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi | 6 +-
arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 8 +-
arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts | 4 +-
arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi | 20 +-
arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts | 8 +-
arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts | 34 +-
arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts | 608 ++++++++++-----------
arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx7s-warp.dts | 4 +-
arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi | 6 +-
arch/arm/boot/dts/nxp/mxs/imx23-evk.dts | 4 +-
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts | 4 +-
arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts | 4 +-
arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts | 4 +-
arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts | 4 +-
arch/arm/boot/dts/nxp/mxs/imx23.dtsi | 4 +-
arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts | 20 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts | 4 +-
arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi | 38 +-
arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 4 +-
76 files changed, 617 insertions(+), 570 deletions(-)
next prev parent reply other threads:[~2024-09-04 14:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-04 14:34 [GIT PULL 1/6] i.MX drivers changes for 6.12 Shawn Guo
2024-09-04 14:34 ` [GIT PULL 2/6] i.MX SoC " Shawn Guo
2024-09-04 14:34 ` [GIT PULL 3/6] i.MX dt-bindings " Shawn Guo
2024-09-04 14:34 ` Shawn Guo [this message]
2024-09-04 14:34 ` [GIT PULL 5/6] i.MX arm64 device tree " Shawn Guo
2024-09-04 14:34 ` [GIT PULL 6/6] i.MX defconfig " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240904143439.211552-4-shawnguo2@yeah.net \
--to=shawnguo2@yeah.net \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=shawnguo@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox