From: Shenwei Wang <shenwei.wang@nxp.com>
To: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
horms@kernel.org
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
Ong Boon Leong <boon.leong.ong@intel.com>,
Wong Vee Khee <vee.khee.wong@intel.com>,
Chuah Kim Tatt <kim.tatt.chuah@intel.com>,
netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
linux-imx@nxp.com, Serge Semin <fancer.lancer@gmail.com>,
Shenwei Wang <shenwei.wang@nxp.com>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH v4 net] net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
Date: Tue, 24 Sep 2024 15:54:24 -0500 [thread overview]
Message-ID: <20240924205424.573913-1-shenwei.wang@nxp.com> (raw)
Increase the timeout for checking the busy bit of the VLAN Tag register
from 10µs to 500ms. This change is necessary to accommodate scenarios
where Energy Efficient Ethernet (EEE) is enabled.
Overnight testing revealed that when EEE is active, the busy bit can
remain set for up to approximately 300ms. The new 500ms timeout provides
a safety margin.
Fixes: ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
Changes in V4:
- fixed the comments and R-b.
Changes in V3:
- re-org the error-check flow per Serge's review.
Changes in v2:
- replace the udelay with readl_poll_timeout per Simon's review.
---
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index a1858f083eef..e65a65666cc1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/ethtool.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include "stmmac.h"
#include "stmmac_pcs.h"
#include "dwmac4.h"
@@ -471,7 +472,7 @@ static int dwmac4_write_vlan_filter(struct net_device *dev,
u8 index, u32 data)
{
void __iomem *ioaddr = (void __iomem *)dev->base_addr;
- int i, timeout = 10;
+ int ret;
u32 val;
if (index >= hw->num_vlan)
@@ -487,16 +488,15 @@ static int dwmac4_write_vlan_filter(struct net_device *dev,
writel(val, ioaddr + GMAC_VLAN_TAG);
- for (i = 0; i < timeout; i++) {
- val = readl(ioaddr + GMAC_VLAN_TAG);
- if (!(val & GMAC_VLAN_TAG_CTRL_OB))
- return 0;
- udelay(1);
+ ret = readl_poll_timeout(ioaddr + GMAC_VLAN_TAG, val,
+ !(val & GMAC_VLAN_TAG_CTRL_OB),
+ 1000, 500000);
+ if (ret) {
+ netdev_err(dev, "Timeout accessing MAC_VLAN_Tag_Filter\n");
+ return -EBUSY;
}
- netdev_err(dev, "Timeout accessing MAC_VLAN_Tag_Filter\n");
-
- return -EBUSY;
+ return 0;
}
static int dwmac4_add_hw_vlan_rx_fltr(struct net_device *dev,
--
2.34.1
next reply other threads:[~2024-09-24 20:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-24 20:54 Shenwei Wang [this message]
2024-10-01 20:08 ` [PATCH v4 net] net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check Serge Semin
2024-10-04 14:23 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240924205424.573913-1-shenwei.wang@nxp.com \
--to=shenwei.wang@nxp.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fancer.lancer@gmail.com \
--cc=horms@kernel.org \
--cc=imx@lists.linux.dev \
--cc=joabreu@synopsys.com \
--cc=kim.tatt.chuah@intel.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vee.khee.wong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox