[PATCH v3 1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number

[Frank Li <Frank.Li@nxp.com>]

The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
function to parser interrupt-map. So it doesn't consider '#address-size'
in parent interrupt controller, such as GIC.

When dt-binding verify interrupt-map, item data matrix is spitted at
incorrect position. So cause below warning:

arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: interrupt-controller@14:
interrupt-map: [[0, 0, 1, 0, 0, 4, 1, 0], [1, 0, 1, 4, 2, 0, 1, 0], ...
is too short

Remove interrupt-map restriction to workaround this warning for
'fsl,ls1088a-extirq', 'fsl,ls2080a-extirq' and fsl,lx2160a-extirq.
Other keep the same restriction.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v2 to v3
- remove interrupt-map restriction according rob's suggestion.
Change from v1 to v2
- remove duplicate function in commit message
- only reduce miniItems for after 1088a chips
- maxItems change to 9. Otherwise report too long.
---
 .../interrupt-controller/fsl,ls-extirq.yaml   | 26 ++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
index 199b34fdbefc4..7ff4efc4758ab 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -82,9 +82,6 @@ allOf:
             enum:
               - fsl,ls1043a-extirq
               - fsl,ls1046a-extirq
-              - fsl,ls1088a-extirq
-              - fsl,ls2080a-extirq
-              - fsl,lx2160a-extirq
     then:
       properties:
         interrupt-map:
@@ -95,6 +92,29 @@ allOf:
             - const: 0xf
             - const: 0
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1088a-extirq
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
+# function to parser interrupt-map. So it doesn't consider '#address-size'
+# in parent interrupt controller, such as GIC.
+#
+# When dt-binding verify interrupt-map, item data matrix is spitted at
+# incorrect position. Remove interrupt-map restriction because it always
+# wrong.
+
+    then:
+      properties:
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
 additionalProperties: false
 
 examples:
-- 
2.34.1