From: Xu Yang <xu.yang_2@nxp.com>
To: Thinh.Nguyen@synopsys.com, gregkh@linuxfoundation.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, Frank.Li@nxp.com
Cc: linux-usb@vger.kernel.org, imx@lists.linux.dev, jun.li@nxp.com
Subject: [PATCH v2] usb: dwc3: imx8mp: fix software node kernel dump
Date: Tue, 26 Nov 2024 11:28:41 +0800 [thread overview]
Message-ID: <20241126032841.2458338-1-xu.yang_2@nxp.com> (raw)
When unbind and bind the device again, kernel will dump below warning:
[ 173.972130] sysfs: cannot create duplicate filename '/devices/platform/soc/4c010010.usb/software_node'
[ 173.981564] CPU: 2 UID: 0 PID: 536 Comm: sh Not tainted 6.12.0-rc6-06344-g2aed7c4a5c56 #144
[ 173.989923] Hardware name: NXP i.MX95 15X15 board (DT)
[ 173.995062] Call trace:
[ 173.997509] dump_backtrace+0x90/0xe8
[ 174.001196] show_stack+0x18/0x24
[ 174.004524] dump_stack_lvl+0x74/0x8c
[ 174.008198] dump_stack+0x18/0x24
[ 174.011526] sysfs_warn_dup+0x64/0x80
[ 174.015201] sysfs_do_create_link_sd+0xf0/0xf8
[ 174.019656] sysfs_create_link+0x20/0x40
[ 174.023590] software_node_notify+0x90/0x100
[ 174.027872] device_create_managed_software_node+0xec/0x108
...
The '4c010010.usb' device is a platform device created during the initcall
and is never removed, which causes its associated software node to persist
indefinitely.
The existing device_create_managed_software_node() does not provide a
corresponding removal function.
Replace device_create_managed_software_node() with the
device_add_software_node() and device_remove_software_node() pair to ensure
proper addition and removal of software nodes, addressing this issue.
Fixes: a9400f1979a0 ("usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
Changes in v2:
- add error handling as suggested by Thinh Nguyen
- modify commit message as suggested Frank
- add Rb-tag
---
drivers/usb/dwc3/dwc3-imx8mp.c | 30 ++++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
index 356812cbcd88..3edc5aca76f9 100644
--- a/drivers/usb/dwc3/dwc3-imx8mp.c
+++ b/drivers/usb/dwc3/dwc3-imx8mp.c
@@ -129,6 +129,16 @@ static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
}
+static const struct property_entry dwc3_imx8mp_properties[] = {
+ PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk"),
+ PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk"),
+ {},
+};
+
+static const struct software_node dwc3_imx8mp_swnode = {
+ .properties = dwc3_imx8mp_properties,
+};
+
static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
{
struct dwc3_imx8mp *dwc3_imx = _dwc3_imx;
@@ -148,17 +158,6 @@ static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
return IRQ_HANDLED;
}
-static int dwc3_imx8mp_set_software_node(struct device *dev)
-{
- struct property_entry props[3] = { 0 };
- int prop_idx = 0;
-
- props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk");
- props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk");
-
- return device_create_managed_software_node(dev, props, NULL);
-}
-
static int dwc3_imx8mp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -221,17 +220,17 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
if (err < 0)
goto disable_rpm;
- err = dwc3_imx8mp_set_software_node(dev);
+ err = device_add_software_node(dev, &dwc3_imx8mp_swnode);
if (err) {
err = -ENODEV;
- dev_err(dev, "failed to create software node\n");
+ dev_err(dev, "failed to add software node\n");
goto disable_rpm;
}
err = of_platform_populate(node, NULL, NULL, dev);
if (err) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
- goto disable_rpm;
+ goto remove_swnode;
}
dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
@@ -255,6 +254,8 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
depopulate:
of_platform_depopulate(dev);
+remove_swnode:
+ device_remove_software_node(dev);
disable_rpm:
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
@@ -268,6 +269,7 @@ static void dwc3_imx8mp_remove(struct platform_device *pdev)
pm_runtime_get_sync(dev);
of_platform_depopulate(dev);
+ device_remove_software_node(dev);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
--
2.34.1
next reply other threads:[~2024-11-26 3:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-26 3:28 Xu Yang [this message]
2024-11-26 22:14 ` [PATCH v2] usb: dwc3: imx8mp: fix software node kernel dump Thinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241126032841.2458338-1-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-usb@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox