[PATCH v2 0/3] SN65DSI83/4 lvds_vod_swing properties

[Andrej Picej <andrej.picej@norik.com>]

Hi all,

this is a v2, which is quite different than the v1. The LVDS differential
voltage swing is now specified as arrays of min, max in microvolts. Two
arrays, one for data-lanes and one for clock-lane can be specified.
Additionally, because LVDS voltage swing depends on near-end termination
this can now also be specified with separate property.

Driver goes through the tables, taken from datasheet [1] and selects the
appropriate configuration. If appropriate configuration can not be found
the probe fails. If these properties are not defined default values are
used as before.

v1 is at: https://lore.kernel.org/all/20241127103031.1007893-1-andrej.picej@norik.com/
v2 changes are described in corresponding patches.

[1] https://www.ti.com/lit/ds/symlink/sn65dsi83.pdf?ts=1732738773429&ref_url=https%253A%252F%252Fwww.mouser.co.uk%252F

Best regards,
Andrej

Andrej Picej (3):
  dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for
    ti,lvds-vod-swing
  drm/bridge: ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
  arm64: dts: imx8mm-phyboard-polis-peb-av-10: Set lvds-vod-swing

 .../bindings/display/bridge/ti,sn65dsi83.yaml |  36 ++++-
 .../imx8mm-phyboard-polis-peb-av-10.dtso      |   2 +
 drivers/gpu/drm/bridge/ti-sn65dsi83.c         | 144 +++++++++++++++++-
 3 files changed, 176 insertions(+), 6 deletions(-)

-- 
2.34.1