Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: "Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Anup Patel" <apatel@ventanamicro.com>,
	"Marc Zyngier" <maz@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	 imx@lists.linux.dev, Niklas Cassel <cassel@kernel.org>,
	dlemoal@kernel.org,  jdmason@kudzu.us,
	linux-arm-kernel@lists.infradead.org,
	 Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v13 0/9] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
Date: Wed, 18 Dec 2024 18:08:35 -0500	[thread overview]
Message-ID: <20241218-ep-msi-v13-0-646e2192dc24@nxp.com> (raw)

┌────────────┐   ┌───────────────────────────────────┐   ┌────────────────┐
│            │   │                                   │   │                │
│            │   │ PCI Endpoint                      │   │ PCI Host       │
│            │   │                                   │   │                │
│            │◄──┤ 1.platform_msi_domain_alloc_irqs()│   │                │
│            │   │                                   │   │                │
│ MSI        ├──►│ 2.write_msi_msg()                 ├──►├─BAR<n>         │
│ Controller │   │   update doorbell register address│   │                │
│            │   │   for BAR                         │   │                │
│            │   │                                   │   │ 3. Write BAR<n>│
│            │◄──┼───────────────────────────────────┼───┤                │
│            │   │                                   │   │                │
│            ├──►│ 4.Irq Handle                      │   │                │
│            │   │                                   │   │                │
│            │   │                                   │   │                │
└────────────┘   └───────────────────────────────────┘   └────────────────┘

This patches based on old https://lore.kernel.org/imx/20221124055036.1630573-1-Frank.Li@nxp.com/

Original patch only target to vntb driver. But actually it is common
method.

This patches add new API to pci-epf-core, so any EP driver can use it.

Previous v2 discussion here.
https://lore.kernel.org/imx/20230911220920.1817033-1-Frank.Li@nxp.com/

Changes in v13:
- Change to use DOMAIN_BUS_PCI_DEVICE_EP_MSI
- Change request id as  func | vfunc << 3
- Remove IRQ_DOMAIN_MSI_IMMUTABLE

Thomas Gleixner:

I hope capture all your points in review comments. If missed, let me know.

- Link to v12: https://lore.kernel.org/r/20241211-ep-msi-v12-0-33d4532fa520@nxp.com

Changes in v12:
- Change to use IRQ_DOMAIN_MSI_IMMUTABLE and add help function
irq_domain_msi_is_immuatble().
- split PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check to 3 patches
- Link to v11: https://lore.kernel.org/r/20241209-ep-msi-v11-0-7434fa8397bd@nxp.com

Changes in v11:
- Change to use MSI_FLAG_MSG_IMMUTABLE
- Link to v10: https://lore.kernel.org/r/20241204-ep-msi-v10-0-87c378dbcd6d@nxp.com

Changes in v10:

Thomas Gleixner:
	There are big change in pci-ep-msi.c. I am sure if go on the
corrent path. The key improvement is remove only 1 function devices's
limitation.

	I use new patch for imutable check, which relative additional
feature compared to base enablement patch.

- Remove patch Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
- Add new patch irqchip/gic-v3-its: Avoid overwriting msi_prepare callback if provided by msi_domain_info
- Remove only support 1 endpoint function limiation.
- Create one MSI domain for each endpoint function devices.
- Use "msi-map" in pci ep controler node, instead of of msi-parent. first
argument is
	(func_no << 8 | vfunc_no)

- Link to v9: https://lore.kernel.org/r/20241203-ep-msi-v9-0-a60dbc3f15dd@nxp.com

Changes in v9
- Add patch platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
- Remove patch PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering
- Remove API pci_epf_align_inbound_addr_lo_hi
- Move doorbell_alloc in to doorbell_enable function.
- Link to v8: https://lore.kernel.org/r/20241116-ep-msi-v8-0-6f1f68ffd1bb@nxp.com

Changes in v8:
- update helper function name to pci_epf_align_inbound_addr()
- Link to v7: https://lore.kernel.org/r/20241114-ep-msi-v7-0-d4ac7aafbd2c@nxp.com

Changes in v7:
- Add helper function pci_epf_align_addr();
- Link to v6: https://lore.kernel.org/r/20241112-ep-msi-v6-0-45f9722e3c2a@nxp.com

Changes in v6:
- change doorbell_addr to doorbell_offset
- use round_down()
- add Niklas's test by tag
- rebase to pci/endpoint
- Link to v5: https://lore.kernel.org/r/20241108-ep-msi-v5-0-a14951c0d007@nxp.com

Changes in v5:
- Move request_irq to epf test function driver for more flexiable user case
- Add fixed size bar handler
- Some minor improvememtn to see each patches's changelog.
- Link to v4: https://lore.kernel.org/r/20241031-ep-msi-v4-0-717da2d99b28@nxp.com

Changes in v4:
- Remove patch genirq/msi: Add cleanup guard define for msi_lock_descs()/msi_unlock_descs()
- Use new method to avoid compatible problem.
  Add new command DOORBELL_ENABLE and DOORBELL_DISABLE.
  pcitest -B send DOORBELL_ENABLE first, EP test function driver try to
remap one of BAR_N (except test register bar) to ITS MSI MMIO space. Old
driver don't support new command, so failure return, not side effect.
  After test, DOORBELL_DISABLE command send out to recover original map, so
pcitest bar test can pass as normal.
- Other detail change see each patches's change log
- Link to v3: https://lore.kernel.org/r/20241015-ep-msi-v3-0-cedc89a16c1a@nxp.com

Change from v2 to v3
- Fixed manivannan's comments
- Move common part to pci-ep-msi.c and pci-ep-msi.h
- rebase to 6.12-rc1
- use RevID to distingiush old version

mkdir /sys/kernel/config/pci_ep/functions/pci_epf_test/func1
echo 16 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/msi_interrupts
echo 0x080c > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/deviceid
echo 0x1957 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/vendorid
echo 1 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/revid
^^^^^^ to enable platform msi support.
ln -s /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 /sys/kernel/config/pci_ep/controllers/4c380000.pcie-ep

- use new device ID, which identify support doorbell to avoid broken
compatility.

    Enable doorbell support only for PCI_DEVICE_ID_IMX8_DB, while other devices
    keep the same behavior as before.

           EP side             RC with old driver      RC with new driver
    PCI_DEVICE_ID_IMX8_DB          no probe              doorbell enabled
    Other device ID             doorbell disabled*       doorbell disabled*

    * Behavior remains unchanged.

Change from v1 to v2
- Add missed patch for endpont/pci-epf-test.c
- Move alloc and free to epc driver from epf.
- Provide general help function for EPC driver to alloc platform msi irq.
- Fixed manivannan's comments.

To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Krzysztof Wilczyński <kw@linux.com>
To: Kishon Vijay Abraham I <kishon@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
To: Arnd Bergmann <arnd@arndb.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: Niklas Cassel <cassel@kernel.org>
Cc: dlemoal@kernel.org
Cc: jdmason@kudzu.us
To: Rafael J. Wysocki <rafael@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>
To: Anup Patel <apatel@ventanamicro.com>
To: Kishon Vijay Abraham I <kishon@kernel.org>
To: Marc Zyngier <maz@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Frank Li (9):
      genirq/msi: Provide DOMAIN_BUS_PLATFORM_PCI_EP_MSI
      PCI: EP: Add helper function pci_epf_msi_domain_get_msi_rid()
      irqchip/gic-v3-its: Add helper function its_pmsi_prepare_devid()
      irqchip/gic-v3-its: Add DOMAIN_BUS_DEVICE_PCI_EP_MSI support
      PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
      PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment
      PCI: endpoint: pci-epf-test: Add doorbell test support
      misc: pci_endpoint_test: Add doorbell test case
      tools: PCI: Add 'B' option for test doorbell

 drivers/irqchip/irq-gic-v3-its-msi-parent.c   |  49 ++++++---
 drivers/irqchip/irq-msi-lib.c                 |   4 +
 drivers/irqchip/irq-msi-lib.h                 |   6 ++
 drivers/misc/pci_endpoint_test.c              |  80 +++++++++++++++
 drivers/pci/endpoint/Makefile                 |   2 +-
 drivers/pci/endpoint/functions/pci-epf-test.c | 132 ++++++++++++++++++++++++
 drivers/pci/endpoint/pci-ep-msi.c             | 140 ++++++++++++++++++++++++++
 drivers/pci/endpoint/pci-epf-core.c           |  44 ++++++++
 include/linux/irqdomain_defs.h                |   2 +
 include/linux/pci-ep-msi.h                    |  26 +++++
 include/linux/pci-epf.h                       |  19 ++++
 include/uapi/linux/pcitest.h                  |   1 +
 tools/pci/pcitest.c                           |  16 ++-
 13 files changed, 507 insertions(+), 14 deletions(-)
---
base-commit: fb32deaabac5c9ac8e555fad420113348cea8bc2
change-id: 20241010-ep-msi-8b4cab33b1be

Best regards,
---
Frank Li <Frank.Li@nxp.com>


             reply	other threads:[~2024-12-18 23:09 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-18 23:08 Frank Li [this message]
2024-12-18 23:08 ` [PATCH v13 1/9] genirq/msi: Provide DOMAIN_BUS_PLATFORM_PCI_EP_MSI Frank Li
2024-12-18 23:08 ` [PATCH v13 2/9] PCI: EP: Add helper function pci_epf_msi_domain_get_msi_rid() Frank Li
2024-12-18 23:08 ` [PATCH v13 3/9] irqchip/gic-v3-its: Add helper function its_pmsi_prepare_devid() Frank Li
2024-12-18 23:08 ` [PATCH v13 4/9] irqchip/gic-v3-its: Add DOMAIN_BUS_DEVICE_PCI_EP_MSI support Frank Li
2024-12-19 10:52   ` Marc Zyngier
2024-12-19 17:02     ` Frank Li
2024-12-19 20:10       ` Niklas Cassel
2024-12-19 20:17         ` Frank Li
2024-12-19 20:43           ` Niklas Cassel
2024-12-19 20:53             ` Frank Li
2025-01-06 16:38       ` Frank Li
2025-01-06 17:13         ` Marc Zyngier
2025-01-06 18:20           ` Frank Li
2025-01-13 16:11             ` Frank Li
2025-01-20 21:20               ` Frank Li
2024-12-18 23:08 ` [PATCH v13 5/9] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller Frank Li
2024-12-18 23:08 ` [PATCH v13 6/9] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment Frank Li
2024-12-18 23:08 ` [PATCH v13 7/9] PCI: endpoint: pci-epf-test: Add doorbell test support Frank Li
2024-12-18 23:08 ` [PATCH v13 8/9] misc: pci_endpoint_test: Add doorbell test case Frank Li
2024-12-18 23:08 ` [PATCH v13 9/9] tools: PCI: Add 'B' option for test doorbell Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241218-ep-msi-v13-0-646e2192dc24@nxp.com \
    --to=frank.li@nxp.com \
    --cc=apatel@ventanamicro.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=cassel@kernel.org \
    --cc=dlemoal@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=imx@lists.linux.dev \
    --cc=jdmason@kudzu.us \
    --cc=kishon@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=maz@kernel.org \
    --cc=rafael@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox