[PATCH 2/5] arm: dts: imx7-mba7: change sound card model name

[Alexander Stein <alexander.stein@ew.tq-group.com>]

From: Markus Niebel <Markus.Niebel@ew.tq-group.com>

The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.

Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same mode name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
index 98956d78c9a18..954739f82d86b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -238,7 +238,7 @@ reg_audio_3v3: regulator-audio-3v3 {
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai1>;
 		audio-codec = <&tlv320aic32x4>;
 		audio-routing =
-- 
2.34.1