From: ernestvanhoecke@gmail.com
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v2 0/2] ARM: dts: apalis/colibri-imx6: Add support for v1.2
Date: Fri, 7 Mar 2025 11:17:47 +0100 [thread overview]
Message-ID: <20250307101758.27943-1-ernest.vanhoecke@toradex.com> (raw)
From: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
The STMPE811 touchscreen controller is no longer disabled by default.
The STMPE811 is self contained within the SoM, therefore, disabling it
is not the correct default behavior.
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
v2: Fixed the "From" field
v1: https://lore.kernel.org/all/20250227170556.589668-1-ernest.vanhoecke@toradex.com/
Ernest Van Hoecke (2):
ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS
ARM: dts: apalis/colibri-imx6: Add support for v1.2
arch/arm/boot/dts/nxp/imx/Makefile | 9 +++
.../dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts | 11 ++++
.../nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts | 11 ++++
.../nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts | 11 ++++
.../dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts | 11 ++++
.../nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts | 11 ++++
.../dts/nxp/imx/imx6q-apalis-v1.2-eval.dts | 11 ++++
.../nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts | 11 ++++
.../nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts | 11 ++++
.../dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts | 11 ++++
.../boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi | 57 +++++++++++++++++++
arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 1 -
.../dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi | 57 +++++++++++++++++++
.../arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 1 -
14 files changed, 222 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi
--
2.43.0
next reply other threads:[~2025-03-07 10:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-07 10:17 ernestvanhoecke [this message]
2025-03-07 10:17 ` [PATCH v2 1/2] ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS ernestvanhoecke
2025-03-07 10:17 ` [PATCH v2 2/2] ARM: dts: apalis/colibri-imx6: Add support for v1.2 ernestvanhoecke
2025-03-17 11:23 ` Krzysztof Kozlowski
2025-03-07 13:25 ` [PATCH v2 0/2] " Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250307101758.27943-1-ernest.vanhoecke@toradex.com \
--to=ernestvanhoecke@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ernest.vanhoecke@toradex.com \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox