[PATCH 03/10] iio: adc: hx711: use struct with aligned_s64 timestamp

[David Lechner <dlechner@baylibre.com>]

Use a struct with aligned s64_timestamp instead of a padded array for
the buffer used for iio_push_to_buffers_with_ts(). This makes it easier
to see the correctness of the size and alignment of the buffer.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/iio/adc/hx711.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 8da0419ecfa3575aa54a93707c681ec8ced28be8..7235fa9e13d57c693751757c5d40e8a799622f17 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -87,7 +87,10 @@ struct hx711_data {
 	 * triggered buffer
 	 * 2x32-bit channel + 64-bit naturally aligned timestamp
 	 */
-	u32			buffer[4] __aligned(8);
+	struct {
+		u32 channel[2];
+		aligned_s64 timestamp;
+	} buffer;
 	/*
 	 * delay after a rising edge on SCK until the data is ready DOUT
 	 * this is dependent on the hx711 where the datasheet tells a
@@ -361,15 +364,15 @@ static irqreturn_t hx711_trigger(int irq, void *p)
 
 	mutex_lock(&hx711_data->lock);
 
-	memset(hx711_data->buffer, 0, sizeof(hx711_data->buffer));
+	memset(&hx711_data->buffer, 0, sizeof(hx711_data->buffer));
 
 	iio_for_each_active_channel(indio_dev, i) {
-		hx711_data->buffer[j] = hx711_reset_read(hx711_data,
+		hx711_data->buffer.channel[j] = hx711_reset_read(hx711_data,
 					indio_dev->channels[i].channel);
 		j++;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, hx711_data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &hx711_data->buffer,
 							pf->timestamp);
 
 	mutex_unlock(&hx711_data->lock);

-- 
2.43.0