Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Csókás, Bence" <csokas.bence@prolan.hu>,
	"Michal Swiatkowski" <michal.swiatkowski@linux.intel.com>,
	"Jacob Keller" <jacob.e.keller@intel.com>,
	"Simon Horman" <horms@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Sasha Levin" <sashal@kernel.org>,
	wei.fang@nxp.com, andrew+netdev@lunn.ch, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, imx@lists.linux.dev,
	netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 6.12 393/486] net: fec: Refactor MAC reset to function
Date: Mon,  5 May 2025 18:37:49 -0400	[thread overview]
Message-ID: <20250505223922.2682012-393-sashal@kernel.org> (raw)
In-Reply-To: <20250505223922.2682012-1-sashal@kernel.org>

From: Csókás, Bence <csokas.bence@prolan.hu>

[ Upstream commit 67800d296191d0a9bde0a7776f99ca1ddfa0fc26 ]

The core is reset both in `fec_restart()` (called on link-up) and
`fec_stop()` (going to sleep, driver remove etc.). These two functions
had their separate implementations, which was at first only a register
write and a `udelay()` (and the accompanying block comment). However,
since then we got soft-reset (MAC disable) and Wake-on-LAN support, which
meant that these implementations diverged, often causing bugs.

For instance, as of now, `fec_stop()` does not check for
`FEC_QUIRK_NO_HARD_RESET`, meaning the MII/RMII mode is cleared on eg.
a PM power-down event; and `fec_restart()` missed the refactor renaming
the "magic" constant `1` to `FEC_ECR_RESET`.

To harmonize current implementations, and eliminate this source of
potential future bugs, refactor implementation to a common function.

Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250207121255.161146-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 52 +++++++++++------------
 1 file changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 2b05d9c6c21a4..00f31d5ea4fca 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1093,6 +1093,29 @@ static void fec_enet_enable_ring(struct net_device *ndev)
 	}
 }
 
+/* Whack a reset.  We should wait for this.
+ * For i.MX6SX SOC, enet use AXI bus, we use disable MAC
+ * instead of reset MAC itself.
+ */
+static void fec_ctrl_reset(struct fec_enet_private *fep, bool allow_wol)
+{
+	u32 val;
+
+	if (!allow_wol || !(fep->wol_flag & FEC_WOL_FLAG_SLEEP_ON)) {
+		if (fep->quirks & FEC_QUIRK_HAS_MULTI_QUEUES ||
+		    ((fep->quirks & FEC_QUIRK_NO_HARD_RESET) && fep->link)) {
+			writel(0, fep->hwp + FEC_ECNTRL);
+		} else {
+			writel(FEC_ECR_RESET, fep->hwp + FEC_ECNTRL);
+			udelay(10);
+		}
+	} else {
+		val = readl(fep->hwp + FEC_ECNTRL);
+		val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
+		writel(val, fep->hwp + FEC_ECNTRL);
+	}
+}
+
 /*
  * This function is called to start or restart the FEC during a link
  * change, transmit timeout, or to reconfigure the FEC.  The network
@@ -1109,17 +1132,7 @@ fec_restart(struct net_device *ndev)
 	if (fep->bufdesc_ex)
 		fec_ptp_save_state(fep);
 
-	/* Whack a reset.  We should wait for this.
-	 * For i.MX6SX SOC, enet use AXI bus, we use disable MAC
-	 * instead of reset MAC itself.
-	 */
-	if (fep->quirks & FEC_QUIRK_HAS_MULTI_QUEUES ||
-	    ((fep->quirks & FEC_QUIRK_NO_HARD_RESET) && fep->link)) {
-		writel(0, fep->hwp + FEC_ECNTRL);
-	} else {
-		writel(1, fep->hwp + FEC_ECNTRL);
-		udelay(10);
-	}
+	fec_ctrl_reset(fep, false);
 
 	/*
 	 * enet-mac reset will reset mac address registers too,
@@ -1373,22 +1386,7 @@ fec_stop(struct net_device *ndev)
 	if (fep->bufdesc_ex)
 		fec_ptp_save_state(fep);
 
-	/* Whack a reset.  We should wait for this.
-	 * For i.MX6SX SOC, enet use AXI bus, we use disable MAC
-	 * instead of reset MAC itself.
-	 */
-	if (!(fep->wol_flag & FEC_WOL_FLAG_SLEEP_ON)) {
-		if (fep->quirks & FEC_QUIRK_HAS_MULTI_QUEUES) {
-			writel(0, fep->hwp + FEC_ECNTRL);
-		} else {
-			writel(FEC_ECR_RESET, fep->hwp + FEC_ECNTRL);
-			udelay(10);
-		}
-	} else {
-		val = readl(fep->hwp + FEC_ECNTRL);
-		val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
-		writel(val, fep->hwp + FEC_ECNTRL);
-	}
+	fec_ctrl_reset(fep, true);
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 	writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
 
-- 
2.39.5


      parent reply	other threads:[~2025-05-05 22:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20250505223922.2682012-1-sashal@kernel.org>
2025-05-05 22:32 ` [PATCH AUTOSEL 6.12 085/486] i3c: master: svc: Fix missing STOP for master request Sasha Levin
2025-05-05 22:34 ` [PATCH AUTOSEL 6.12 172/486] crypto: mxs-dcp - Only set OTP_KEY bit for OTP key Sasha Levin
2025-05-05 22:34 ` [PATCH AUTOSEL 6.12 222/486] clk: imx8mp: inform CCF of maximum frequency of clocks Sasha Levin
2025-05-05 22:36 ` [PATCH AUTOSEL 6.12 295/486] i3c: master: svc: Flush FIFO before sending Dynamic Address Assignment(DAA) Sasha Levin
2025-05-05 22:36 ` [PATCH AUTOSEL 6.12 306/486] serial: mctrl_gpio: split disable_ms into sync and no_sync APIs Sasha Levin
2025-05-05 22:36 ` [PATCH AUTOSEL 6.12 308/486] pmdomain: imx: gpcv2: use proper helper for property detection Sasha Levin
2025-05-05 22:37 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250505223922.2682012-393-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=csokas.bence@prolan.hu \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=jacob.e.keller@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.swiatkowski@linux.intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    --cc=wei.fang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox