Re: [PATCH v7 01/12] dt-bindings: mfd: add support for the NXP SIUL2 module

[Krzysztof Kozlowski <krzk@kernel.org>]

On Thu, Jul 10, 2025 at 05:20:24PM +0300, Andrei Stefanescu wrote:
> Add the dt-bindings for the NXP SIUL2 module which is a multi
> function device. It can export information about the SoC, configure
> the pinmux&pinconf for pins and it is also a GPIO controller with
> interrupt capability.
> 
> Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
> ---
>  .../bindings/mfd/nxp,s32g2-siul2.yaml         | 163 ++++++++++++++++++
>  1 file changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/nxp,s32g2-siul2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/nxp,s32g2-siul2.yaml b/Documentation/devicetree/bindings/mfd/nxp,s32g2-siul2.yaml
> new file mode 100644
> index 000000000000..8ae185b4bc78
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/nxp,s32g2-siul2.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2024 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/nxp,s32g2-siul2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP S32 System Integration Unit Lite2 (SIUL2)
> +
> +maintainers:
> +  - Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
> +
> +description: |
> +  SIUL2 is a hardware block which implements pinmuxing,
> +  pinconf, GPIOs (some with interrupt capability) and
> +  registers which contain information about the SoC.
> +  There are generally two SIUL2 modules whose functionality
> +  is grouped together. For example interrupt configuration
> +  registers are part of SIUL2_1 even though interrupts are
> +  also available for SIUL2_0 pins.
> +
> +  The following register types are exported by SIUL2:
> +    - MIDR (MCU ID Register) - information related to the SoC
> +    - interrupt configuration registers
> +    - MSCR (Multiplexed Signal Configuration Register) - pinmuxing and pinconf
> +    - IMCR (Input Multiplexed Signal Configuration Register)- pinmuxing
> +    - PGPDO (Parallel GPIO Pad Data Out Register) - GPIO output value
> +    - PGPDI (Parallel GPIO Pad Data In Register) - GPIO input value
> +
> +  Most registers are 32bit wide with the exception of PGPDO/PGPDI which are
> +  16bit wide.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: nxp,s32g2-siul2
> +      - items:
> +          - enum:
> +              - nxp,s32g3-siul2
> +          - const: nxp,s32g2-siul2
> +
> +  reg:
> +    minItems: 2

Eh, and after reading your deprecated patch I went back here and see
this changed... Why? Why are you making random changes?

I retract my review, I was too hasty.

Best regards,
Krzysztof