[PATCH v4 net-next 0/5] net: fec: add the Jumbo frame support

[Shenwei Wang <shenwei.wang@nxp.com>]

Changes in v4:
 - configure the MAX_FL according to the MTU value, and correct the
   comments for patch #3.
 - in change_mtu function, revert to original setting when buffer
   allocation fails in patch #4
 - only enable the FIFO cut-through mode when mtu greater than
   (PKT_MAXBUF_SIZE - ETH_HLEN - ETH_FCS_LEN)

Changes in v3:
 - modify the OPT_FRAME_SIZE definition and drop the condition logic
 - address the review comments from Wei Fang

Changes in v2:
 - split the v1 patch per Andrew's feedback.

Shenwei Wang (5):
  net: fec: use a member variable for maximum buffer size
  net: fec: add pagepool_order to support variable page size
  net: fec: add rx_frame_size to support configurable RX length
  net: fec: add change_mtu to support dynamic buffer allocation
  net: fec: enable the Jumbo frame support for i.MX8QM

 drivers/net/ethernet/freescale/fec.h      |  6 ++
 drivers/net/ethernet/freescale/fec_main.c | 96 ++++++++++++++++++++---
 2 files changed, 91 insertions(+), 11 deletions(-)

--
2.43.0