From: Guoniu Zhou <guoniu.zhou@nxp.com>
To: Rui Miguel Silva <rmfrfs@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Martin Kepplinger <martink@posteo.de>,
Purism Kernel Team <kernel@puri.sm>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Frank Li <Frank.Li@nxp.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Guoniu Zhou <guoniu.zhou@nxp.com>
Subject: [PATCH v5 1/4] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string
Date: Mon, 01 Sep 2025 14:25:29 +0800 [thread overview]
Message-ID: <20250901-csi2_imx8ulp-v5-1-67964d1471f3@nxp.com> (raw)
In-Reply-To: <20250901-csi2_imx8ulp-v5-0-67964d1471f3@nxp.com>
The CSI-2 receiver in the i.MX8ULP is almost identical to the version
present in the i.MX8QXP/QM, but i.MX8ULP CSI-2 controller needs pclk
clock as the input clock for its APB interface of Control and Status
register(CSR). So add compatible string fsl,imx8ulp-mipi-csi2 and
increase maxItems of Clocks (clock-names) to 4 from 3. And keep the
same restriction for existed compatible.
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
---
.../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 46 ++++++++++++++++++++--
1 file changed, 43 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 3389bab266a9adbda313c8ad795b998641df12f3..412cedddb0efee1a49d1b90b02baa7a625c797ec 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -21,7 +21,9 @@ properties:
- fsl,imx8mq-mipi-csi2
- fsl,imx8qxp-mipi-csi2
- items:
- - const: fsl,imx8qm-mipi-csi2
+ - enum:
+ - fsl,imx8qm-mipi-csi2
+ - fsl,imx8ulp-mipi-csi2
- const: fsl,imx8qxp-mipi-csi2
reg:
@@ -39,12 +41,16 @@ properties:
clock that the RX DPHY receives.
- description: ui is the pixel clock (phy_ref up to 333Mhz).
See the reference manual for details.
+ - description: pclk is clock for csr APB interface.
+ minItems: 3
clock-names:
items:
- const: core
- const: esc
- const: ui
+ - const: pclk
+ minItems: 3
power-domains:
maxItems: 1
@@ -130,19 +136,53 @@ allOf:
compatible:
contains:
enum:
- - fsl,imx8qxp-mipi-csi2
+ - fsl,imx8ulp-mipi-csi2
+ then:
+ properties:
+ reg:
+ minItems: 2
+ resets:
+ minItems: 2
+ maxItems: 2
+ clocks:
+ minItems: 4
+ clock-names:
+ minItems: 4
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-mipi-csi2
+ const: fsl,imx8qxp-mipi-csi2
then:
properties:
reg:
minItems: 2
resets:
maxItems: 1
- else:
+ clocks:
+ maxItems: 3
+ clock-names:
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mq-mipi-csi2
+ then:
properties:
reg:
maxItems: 1
resets:
minItems: 3
+ clocks:
+ maxItems: 3
+ clock-names:
+ maxItems: 3
required:
- fsl,mipi-phy-gpr
--
2.34.1
next prev parent reply other threads:[~2025-09-01 6:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-01 6:25 [PATCH v5 0/4] Add MIPI CSI-2 support for i.MX8ULP Guoniu Zhou
2025-09-01 6:25 ` Guoniu Zhou [this message]
2025-09-01 15:46 ` [PATCH v5 1/4] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string Laurent Pinchart
2025-09-02 1:45 ` Frank Li
2025-09-02 8:35 ` Laurent Pinchart
2025-09-02 11:52 ` Frank Li
2025-09-02 12:26 ` Krzysztof Kozlowski
2025-09-02 12:35 ` Laurent Pinchart
2025-09-02 15:53 ` Krzysztof Kozlowski
2025-09-03 16:16 ` Frank Li
2025-09-03 19:21 ` Laurent Pinchart
2025-09-04 14:49 ` Frank Li
2025-09-01 6:25 ` [PATCH v5 2/4] media: imx8mq-mipi-csi2: Use devm_clk_bulk_get_all() to fetch clocks Guoniu Zhou
2025-09-01 6:25 ` [PATCH v5 3/4] media: imx8mq-mipi-csi2: Explicitly release reset Guoniu Zhou
2025-09-01 15:36 ` Laurent Pinchart
2025-09-02 2:21 ` [EXT] " G.N. Zhou
2025-09-02 8:39 ` Laurent Pinchart
2025-09-01 6:25 ` [PATCH v5 4/4] arm64: dts: imx8ulp: Add CSI and ISI Nodes Guoniu Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250901-csi2_imx8ulp-v5-1-67964d1471f3@nxp.com \
--to=guoniu.zhou@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rmfrfs@gmail.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).