From: Wei Fang <wei.fang@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
claudiu.manoil@nxp.com, vladimir.oltean@nxp.com,
xiaoning.wang@nxp.com, Frank.Li@nxp.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, richardcochran@gmail.com
Cc: imx@lists.linux.dev, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v3 net-next 4/6] net: enetc: add ptp timer binding support for i.MX94
Date: Mon, 27 Oct 2025 09:45:01 +0800 [thread overview]
Message-ID: <20251027014503.176237-5-wei.fang@nxp.com> (raw)
In-Reply-To: <20251027014503.176237-1-wei.fang@nxp.com>
From: Clark Wang <xiaoning.wang@nxp.com>
The i.MX94 has three PTP timers, and all standalone ENETCs can select
one of them to bind to as their PHC. The 'ptp-timer' property is used
to represent the PTP device of the Ethernet controller. So users can
add 'ptp-timer' to the ENETC node to specify the PTP timer. The driver
parses this property to bind the two hardware devices.
If the "ptp-timer" property is not present, the first timer of the PCIe
bus where the ENETC is located is used as the default bound PTP timer.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
.../ethernet/freescale/enetc/netc_blk_ctrl.c | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
index 5978ea096e80..3fe8f864bcf4 100644
--- a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
+++ b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
@@ -66,6 +66,7 @@
/* NETC integrated endpoint register block register */
#define IERB_EMDIOFAUXR 0x344
#define IERB_T0FAUXR 0x444
+#define IERB_ETBCR(a) (0x300c + 0x100 * (a))
#define IERB_EFAUXR(a) (0x3044 + 0x100 * (a))
#define IERB_VFAUXR(a) (0x4004 + 0x40 * (a))
#define FAUXR_LDID GENMASK(3, 0)
@@ -78,10 +79,16 @@
#define IMX94_ENETC0_BUS_DEVFN 0x100
#define IMX94_ENETC1_BUS_DEVFN 0x140
#define IMX94_ENETC2_BUS_DEVFN 0x180
+#define IMX94_TIMER0_BUS_DEVFN 0x1
+#define IMX94_TIMER1_BUS_DEVFN 0x101
+#define IMX94_TIMER2_BUS_DEVFN 0x181
#define IMX94_ENETC0_LINK 3
#define IMX94_ENETC1_LINK 4
#define IMX94_ENETC2_LINK 5
+#define NETC_ENETC_ID(a) (a)
+#define NETC_TIMER_ID(a) (a)
+
/* Flags for different platforms */
#define NETC_HAS_NETCMIX BIT(0)
@@ -345,6 +352,97 @@ static int imx95_ierb_init(struct platform_device *pdev)
return 0;
}
+static int imx94_get_enetc_id(struct device_node *np)
+{
+ int bus_devfn = netc_of_pci_get_bus_devfn(np);
+
+ /* Parse ENETC offset */
+ switch (bus_devfn) {
+ case IMX94_ENETC0_BUS_DEVFN:
+ return NETC_ENETC_ID(0);
+ case IMX94_ENETC1_BUS_DEVFN:
+ return NETC_ENETC_ID(1);
+ case IMX94_ENETC2_BUS_DEVFN:
+ return NETC_ENETC_ID(2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int imx94_get_timer_id(struct device_node *np)
+{
+ int bus_devfn = netc_of_pci_get_bus_devfn(np);
+
+ /* Parse NETC PTP timer ID, the timer0 is on bus 0,
+ * the timer 1 and timer2 is on bus 1.
+ */
+ switch (bus_devfn) {
+ case IMX94_TIMER0_BUS_DEVFN:
+ return NETC_TIMER_ID(0);
+ case IMX94_TIMER1_BUS_DEVFN:
+ return NETC_TIMER_ID(1);
+ case IMX94_TIMER2_BUS_DEVFN:
+ return NETC_TIMER_ID(2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int imx94_enetc_update_tid(struct netc_blk_ctrl *priv,
+ struct device_node *np)
+{
+ struct device_node *timer_np __free(device_node) = NULL;
+ struct device *dev = &priv->pdev->dev;
+ int eid, tid;
+
+ eid = imx94_get_enetc_id(np);
+ if (eid < 0) {
+ dev_err(dev, "Failed to get ENETC ID\n");
+ return eid;
+ }
+
+ timer_np = of_parse_phandle(np, "ptp-timer", 0);
+ if (!timer_np) {
+ /* If 'ptp-timer' is not present, the timer1 is the default
+ * timer of all standalone ENETCs, which is on the same PCIe
+ * bus as these ENETCs.
+ */
+ tid = NETC_TIMER_ID(1);
+ goto end;
+ }
+
+ tid = imx94_get_timer_id(timer_np);
+ if (tid < 0) {
+ dev_err(dev, "Failed to get NETC Timer ID\n");
+ return tid;
+ }
+
+end:
+ netc_reg_write(priv->ierb, IERB_ETBCR(eid), tid);
+
+ return 0;
+}
+
+static int imx94_ierb_init(struct platform_device *pdev)
+{
+ struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
+ struct device_node *np = pdev->dev.of_node;
+ int err;
+
+ for_each_child_of_node_scoped(np, child) {
+ for_each_child_of_node_scoped(child, gchild) {
+ if (!of_device_is_compatible(gchild, "pci1131,e101"))
+ continue;
+
+ err = imx94_enetc_update_tid(priv, gchild);
+ if (err)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
static int netc_ierb_init(struct platform_device *pdev)
{
struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
@@ -441,6 +539,7 @@ static const struct netc_devinfo imx95_devinfo = {
static const struct netc_devinfo imx94_devinfo = {
.flags = NETC_HAS_NETCMIX,
.netcmix_init = imx94_netcmix_init,
+ .ierb_init = imx94_ierb_init,
};
static const struct of_device_id netc_blk_ctrl_match[] = {
--
2.34.1
next prev parent reply other threads:[~2025-10-27 2:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-27 1:44 [PATCH v3 net-next 0/6] net: enetc: Add i.MX94 ENETC support Wei Fang
2025-10-27 1:44 ` [PATCH v3 net-next 1/6] dt-bindings: net: netc-blk-ctrl: add compatible string for i.MX94 platforms Wei Fang
2025-10-27 1:44 ` [PATCH v3 net-next 2/6] dt-bindings: net: enetc: add compatible string for ENETC with pseduo MAC Wei Fang
2025-10-27 1:45 ` [PATCH v3 net-next 3/6] net: enetc: add preliminary i.MX94 NETC blocks control support Wei Fang
2025-10-27 1:45 ` Wei Fang [this message]
2025-10-28 23:56 ` [PATCH v3 net-next 4/6] net: enetc: add ptp timer binding support for i.MX94 Jakub Kicinski
2025-10-29 0:14 ` Wei Fang
2025-10-27 1:45 ` [PATCH v3 net-next 5/6] net: enetc: add basic support for the ENETC with pseudo MAC " Wei Fang
2025-10-27 8:26 ` Claudiu Manoil
2025-10-27 1:45 ` [PATCH v3 net-next 6/6] net: enetc: add standalone ENETC support " Wei Fang
2025-10-28 23:57 ` [PATCH v3 net-next 0/6] net: enetc: Add i.MX94 ENETC support Jakub Kicinski
2025-10-29 0:13 ` Wei Fang
2025-10-29 0:19 ` Jakub Kicinski
2025-10-29 0:26 ` Wei Fang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251027014503.176237-5-wei.fang@nxp.com \
--to=wei.fang@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=andrew+netdev@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=vladimir.oltean@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).