Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Peter Ujfalusi <peter.ujfalusi@linux.intel.com>,
	Bard Liao <yung-chuan.liao@linux.intel.com>,
	Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Kai Vehmanen <kai.vehmanen@linux.intel.com>,
	Mark Brown <broonie@kernel.org>,
	Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: linux-sound@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] ASoC: SOF: imx9: use SCMI API for LM management
Date: Fri, 14 Nov 2025 06:35:03 -0800	[thread overview]
Message-ID: <20251114143503.2139-1-laurentiumihalcea111@gmail.com> (raw)

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Linux supports NXP's LMM SCMI protocol so switch to using the appropriate
API. The SIPs were intended to act as placeholders until the support for
said protocol was upstreamed.

The underlying CPU protocol command from IMX_SIP_SRC_M_RESET_ADDR_SET is
replaced by a LMM protocol command with the same effect (i.e. setting the
boot address) since using the CPU protocol would require additional
permissions (which TF-A already had). Apart from this, the SIPs are
replaced by their equivalent Linux LMM commands.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
Changes in v2:

* add dependency on CONFIG_IMX_SCMI_LMM_DRV.
* link to v1: https://lore.kernel.org/lkml/20251112144124.680-1-laurentiumihalcea111@gmail.com/

 sound/soc/sof/imx/Kconfig |  1 +
 sound/soc/sof/imx/imx9.c  | 36 ++++++++----------------------------
 2 files changed, 9 insertions(+), 28 deletions(-)

diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig
index 327e2df94a58..09d88ce5b9e6 100644
--- a/sound/soc/sof/imx/Kconfig
+++ b/sound/soc/sof/imx/Kconfig
@@ -35,6 +35,7 @@ config SND_SOC_SOF_IMX8
 config SND_SOC_SOF_IMX9
 	tristate "SOF support for i.MX9"
 	depends on IMX_DSP
+	depends on IMX_SCMI_LMM_DRV
 	select SND_SOC_SOF_IMX_COMMON
 	help
 	  This adds support for Sound Open Firmware for NXP i.MX9 platforms.
diff --git a/sound/soc/sof/imx/imx9.c b/sound/soc/sof/imx/imx9.c
index 853155d5990a..e56e8a1c8022 100644
--- a/sound/soc/sof/imx/imx9.c
+++ b/sound/soc/sof/imx/imx9.c
@@ -3,19 +3,11 @@
  * Copyright 2025 NXP
  */
 
-#include <linux/arm-smccc.h>
+#include <linux/firmware/imx/sm.h>
 
 #include "imx-common.h"
 
-#define IMX_SIP_SRC 0xC2000005
-#define IMX_SIP_SRC_M_RESET_ADDR_SET 0x03
-
-#define IMX95_CPU_VEC_FLAGS_BOOT BIT(29)
-
-#define IMX_SIP_LMM 0xC200000F
-#define IMX_SIP_LMM_BOOT 0x0
-#define IMX_SIP_LMM_SHUTDOWN 0x1
-
+#define IMX95_M7_CPU_ID 0x1
 #define IMX95_M7_LM_ID 0x1
 
 static struct snd_soc_dai_driver imx95_dai[] = {
@@ -38,7 +30,6 @@ static int imx95_ops_init(struct snd_sof_dev *sdev)
 
 static int imx95_chip_probe(struct snd_sof_dev *sdev)
 {
-	struct arm_smccc_res smc_res;
 	struct platform_device *pdev;
 	struct resource *res;
 
@@ -49,31 +40,20 @@ static int imx95_chip_probe(struct snd_sof_dev *sdev)
 		return dev_err_probe(sdev->dev, -ENODEV,
 				     "failed to fetch SRAM region\n");
 
-	/* set core boot reset address */
-	arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M_RESET_ADDR_SET, res->start,
-		      IMX95_CPU_VEC_FLAGS_BOOT, 0, 0, 0, 0, &smc_res);
-
-	return smc_res.a0;
+	return scmi_imx_lmm_reset_vector_set(IMX95_M7_LM_ID, IMX95_M7_CPU_ID,
+					     0, res->start);
 }
 
 static int imx95_core_kick(struct snd_sof_dev *sdev)
 {
-	struct arm_smccc_res smc_res;
-
-	arm_smccc_smc(IMX_SIP_LMM, IMX_SIP_LMM_BOOT,
-		      IMX95_M7_LM_ID, 0, 0, 0, 0, 0, &smc_res);
-
-	return smc_res.a0;
+	return scmi_imx_lmm_operation(IMX95_M7_LM_ID, SCMI_IMX_LMM_BOOT, 0);
 }
 
 static int imx95_core_shutdown(struct snd_sof_dev *sdev)
 {
-	struct arm_smccc_res smc_res;
-
-	arm_smccc_smc(IMX_SIP_LMM, IMX_SIP_LMM_SHUTDOWN,
-		      IMX95_M7_LM_ID, 0, 0, 0, 0, 0, &smc_res);
-
-	return smc_res.a0;
+	return scmi_imx_lmm_operation(IMX95_M7_LM_ID,
+				      SCMI_IMX_LMM_SHUTDOWN,
+				      SCMI_IMX_LMM_OP_FORCEFUL);
 }
 
 static const struct imx_chip_ops imx95_chip_ops = {
-- 
2.43.0


             reply	other threads:[~2025-11-14 14:35 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-14 14:35 Laurentiu Mihalcea [this message]
2025-11-14 16:46 ` [PATCH v2] ASoC: SOF: imx9: use SCMI API for LM management Iuliana Prodan
2025-11-19  2:09 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251114143503.2139-1-laurentiumihalcea111@gmail.com \
    --to=laurentiumihalcea111@gmail.com \
    --cc=broonie@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=iuliana.prodan@nxp.com \
    --cc=kai.vehmanen@linux.intel.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=peter.ujfalusi@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=yung-chuan.liao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox