[PATCH V2] arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart

[Sherry Sun <sherry.sun@nxp.com>]

The commit 616effc0272b5 ("arm64: dts: imx8: Fix lpuart DMA channel
order") swap uart rx and tx channel at common imx8-ss-dma.dtsi. But miss
update imx8qm-ss-dma.dtsi.

The commit 5a8e9b022e569 ("arm64: dts: imx8qm-ss-dma: Pass lpuart
dma-names") just simple add dma-names as binding doc requirement.

Correct lpuart0 - lpuart3 dma rx and tx channels, and use defines for
the FSL_EDMA_RX flag.

Fixes: 5a8e9b022e56 ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
Changes in V2:
1. Correct the fixes commit as Frank and Alexander suggested.
---
 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index 5f24850bf322..974e193f8dcb 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -172,25 +172,25 @@ &flexcan3 {
 
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dmas = <&edma2 16 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
 	dma-names = "rx","tx";
 };
 
-- 
2.34.1