[PATCH 6/8] nvmet: pci-epf: Use dmaengine_prep_slave_single_config() API

[Frank Li <Frank.Li@nxp.com>]

Use the new dmaengine_prep_slave_single_config() API to combine the
configuration and descriptor preparation into a single call.

Since dmaengine_prep_slave_single_config() performs the configuration
and preparation atomically, the mutex can be removed.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/nvme/target/pci-epf.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/nvme/target/pci-epf.c b/drivers/nvme/target/pci-epf.c
index 85225a4f75b5bd7abb6897d064123766af021542..223716b00715be2a81935e6920666c723fe98fe7 100644
--- a/drivers/nvme/target/pci-epf.c
+++ b/drivers/nvme/target/pci-epf.c
@@ -386,22 +386,16 @@ static int nvmet_pci_epf_dma_transfer(struct nvmet_pci_epf *nvme_epf,
 		return -EINVAL;
 	}
 
-	mutex_lock(lock);
-
 	dma_dev = dmaengine_get_dma_device(chan);
 	dma_addr = dma_map_single(dma_dev, seg->buf, seg->length, dir);
 	ret = dma_mapping_error(dma_dev, dma_addr);
 	if (ret)
-		goto unlock;
-
-	ret = dmaengine_slave_config(chan, &sconf);
-	if (ret) {
-		dev_err(dev, "Failed to configure DMA channel\n");
-		goto unmap;
-	}
+		return ret;
 
-	desc = dmaengine_prep_slave_single(chan, dma_addr, seg->length,
-					   sconf.direction, DMA_CTRL_ACK);
+	desc = dmaengine_prep_slave_single_config(chan, dma_addr, seg->length,
+						  sconf.direction,
+						  DMA_CTRL_ACK,
+						  &sconf);
 	if (!desc) {
 		dev_err(dev, "Failed to prepare DMA\n");
 		ret = -EIO;
@@ -423,9 +417,6 @@ static int nvmet_pci_epf_dma_transfer(struct nvmet_pci_epf *nvme_epf,
 unmap:
 	dma_unmap_single(dma_dev, dma_addr, seg->length, dir);
 
-unlock:
-	mutex_unlock(lock);
-
 	return ret;
 }
 

-- 
2.34.1