[RFC PATCH] remoteproc: imx_dsp_rproc: Fix multiple start/stop commands

[Daniel Baluta <daniel.baluta@nxp.com>]

After commit 67a7bc7f0358 ("remoteproc: Use of reserved_mem_region_*
functions for "memory-region"") following commands with
imx-dsp-rproc started to fail:

$ echo zephyr.elf > /sys/class/remoteproc/remoteproc0/firmware
$ echo start > /sys/class/remoteproc/remoteproc0/state
$ echo stop > /sys/class/remoteproc/remoteproc0/state
$ echo start > /sys/class/remoteproc/remoteproc0/state #! This fails
-sh: echo: write error: Device or resource busy

This happens because aforementioned commit replaced devm_ioremap_wc with
devm_ioremap_resource_wc which will "reserve" the memory region with the
first start and then will fail at the second start if the memory
region is already reserved.

So prefer using devm_ioremap_wc as there is no easy way to undo
devm_iormep_resource_wc manually.

Fixes: 67a7bc7f0358 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 5130a35214c9..79d5c15319f3 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -709,10 +709,10 @@ static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
 		if (imx_dsp_rproc_sys_to_da(priv, res.start, resource_size(&res), &da))
 			return -EINVAL;
 
-		cpu_addr = devm_ioremap_resource_wc(dev, &res);
-		if (IS_ERR(cpu_addr)) {
+		cpu_addr = devm_ioremap_wc(dev, res.start, resource_size(&res));
+		if (!cpu_addr) {
 			dev_err(dev, "failed to map memory %pR\n", &res);
-			return PTR_ERR(cpu_addr);
+			return -ENOMEM;
 		}
 
 		/* Register memory region */
-- 
2.45.2