From: Stefano Radaelli <stefano.r@variscite.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Stefano Radaelli <stefano.r@variscite.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 2/6] arm64: dts: imx8mp-var-som: Remove PCA9534 GPIO expander
Date: Wed, 10 Dec 2025 16:19:54 +0100 [thread overview]
Message-ID: <20251210152000.42265-3-stefano.r@variscite.com> (raw)
In-Reply-To: <20251210152000.42265-1-stefano.r@variscite.com>
The VAR-SOM-MX8MP module does not include the PCA9534 GPIO expander nor
the LED connected to it. These components are present only on the
Symphony carrier board and may vary depending on the final carrier
design.
Since the PCA9534 is not part of the SOM hardware, its node and related
LED definition do not belong in the SOM dtsi and are removed.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
.../boot/dts/freescale/imx8mp-var-som.dtsi | 50 -------------------
1 file changed, 50 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index 949d9878f395..158a78ec9656 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -19,16 +19,6 @@ chosen {
stdout-path = &uart2;
};
- gpio-leds {
- compatible = "gpio-leds";
-
- led-0 {
- function = LED_FUNCTION_POWER;
- gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0xc0000000>,
@@ -216,33 +206,6 @@ ldo5: LDO5 {
};
};
-&i2c3 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-
- /* GPIO expander */
- pca9534: gpio@20 {
- compatible = "nxp,pca9534";
- reg = <0x20>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pca9534>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
- wakeup-source;
-
- usb3-sata-sel-hog {
- gpio-hog;
- gpios = <4 0>;
- output-low;
- line-name = "usb3_sata_sel";
- };
- };
-};
-
/* Console */
&uart2 {
pinctrl-names = "default";
@@ -298,19 +261,6 @@ MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA 0x400001c2
>;
};
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
- MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
- >;
- };
-
- pinctrl_pca9534: pca9534grp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0xc0
- >;
- };
-
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1c0
--
2.47.3
next prev parent reply other threads:[~2025-12-10 15:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-10 15:19 [PATCH v1 0/6] arm64: dts: imx8mp-var-som: align DTS with hardware revision Stefano Radaelli
2025-12-10 15:19 ` [PATCH v1 1/6] arm64: dts: imx8mp-var-som: Remove USDHC2 controller and related signals Stefano Radaelli
2025-12-10 15:19 ` Stefano Radaelli [this message]
2025-12-10 15:19 ` [PATCH v1 3/6] arm64: dts: imx8mp-var-som: Remove UART2 console Stefano Radaelli
2025-12-11 0:46 ` Fabio Estevam
[not found] ` <DB4PR08MB103414303516B7FAFF29DB571E9A1A@DB4PR08MB10341.eurprd08.prod.outlook.com>
2025-12-11 12:31 ` Fabio Estevam
2025-12-10 15:19 ` [PATCH v1 4/6] arm64: dts: imx8mp-var-som: Add WiFi and Bluetooth support Stefano Radaelli
2025-12-10 15:19 ` [PATCH v1 5/6] arm64: dts: imx8mp-var-som: Add support for WM8904 audio codec Stefano Radaelli
2025-12-10 15:19 ` [PATCH v1 6/6] arm64: dts: imx8mp-var-som: Add support for ADS7846 touchscreen Stefano Radaelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251210152000.42265-3-stefano.r@variscite.com \
--to=stefano.r@variscite.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox