Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Sherry Sun <sherry.sun@nxp.com>
To: hongxing.zhu@nxp.com, l.stach@pengutronix.de,
	bhelgaas@google.com, lpieralisi@kernel.org,
	kwilczynski@kernel.org, mani@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com, frank.li@nxp.com
Cc: kernel@pengutronix.de, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 09/10] arm64: dts: imx8dxl/qm/qxp: Add Root Port nodes and move PERST property to Root Port node
Date: Mon, 19 Jan 2026 18:02:34 +0800	[thread overview]
Message-ID: <20260119100235.1173839-10-sherry.sun@nxp.com> (raw)
In-Reply-To: <20260119100235.1173839-1-sherry.sun@nxp.com>

Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port nodes and move the reset-gpios property.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 .../boot/dts/freescale/imx8-ss-hsio.dtsi      | 11 ++++++++++
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts |  5 ++++-
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 10 +++++++--
 .../boot/dts/freescale/imx8qm-ss-hsio.dtsi    | 22 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  5 ++++-
 5 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
index 469de8b536b5..009990b2e559 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -78,6 +78,17 @@ pcieb: pcie@5f010000 {
 		power-domains = <&pd IMX_SC_R_PCIE_B>;
 		fsl,max-link-speed = <3>;
 		status = "disabled";
+
+		pcieb_port0: pcie@0 {
+			compatible = "pciclass,0604";
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcieb_ep: pcie-ep@5f010000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 5c68d33e19f2..63a655399888 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -651,7 +651,6 @@ &pcie0 {
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
 	pinctrl-names = "default";
-	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcieb>;
 	vpcie3v3aux-supply = <&reg_pcieb>;
 	status = "okay";
@@ -667,6 +666,10 @@ &pcie0_ep {
 	status = "disabled";
 };
 
+&pcieb_port0 {
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+};
+
 &sai0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index dadc136aec6e..f57d2391b0ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -802,22 +802,28 @@ &pciea {
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pciea>;
 	pinctrl-names = "default";
-	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pciea>;
 	vpcie3v3aux-supply = <&reg_pciea>;
 	supports-clkreq;
 	status = "okay";
 };
 
+&pciea_port0 {
+	reset-gpios = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
+};
+
 &pcieb {
 	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
 	pinctrl-names = "default";
-	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
+&pcieb_port0 {
+	reset-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+};
+
 &qm_pwm_lvds0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_lvds0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
index bd6e0aa27efe..48c29c2cfe8b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -40,6 +40,17 @@ pcie0: pciea: pcie@5f000000 {
 		power-domains = <&pd IMX_SC_R_PCIE_A>;
 		fsl,max-link-speed = <3>;
 		status = "disabled";
+
+		pciea_port0: pcie@0 {
+			compatible = "pciclass,0604";
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcie0_ep: pciea_ep: pcie-ep@5f000000 {
@@ -90,6 +101,17 @@ pcie1: pcieb: pcie@5f010000 {
 		power-domains = <&pd IMX_SC_R_PCIE_B>;
 		fsl,max-link-speed = <3>;
 		status = "disabled";
+
+		pcieb_port0: pcie@0 {
+			compatible = "pciclass,0604";
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	sata: sata@5f020000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 40a0bc9f4e84..fdd9009a2a7e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -722,7 +722,6 @@ &pcie0 {
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
 	pinctrl-names = "default";
-	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcieb>;
 	vpcie3v3aux-supply = <&reg_pcieb>;
 	supports-clkreq;
@@ -738,6 +737,10 @@ &pcie0_ep {
 	status = "disabled";
 };
 
+&pcieb_port0 {
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+};
+
 &scu_key {
 	status = "okay";
 };
-- 
2.37.1


  parent reply	other threads:[~2026-01-19 10:04 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-19 10:02 [PATCH 00/10] pci-imx6: Add support for parsing the reset property in new Root Port binding Sherry Sun
2026-01-19 10:02 ` [PATCH 01/10] dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node Sherry Sun
2026-01-19 16:15   ` Frank Li
2026-01-20  2:22     ` Sherry Sun
2026-01-21 16:40   ` Rob Herring
2026-01-22  2:31     ` Sherry Sun
2026-01-19 10:02 ` [PATCH 02/10] PCI: imx6: Add support for parsing the reset property in new Root Port binding Sherry Sun
2026-01-19 16:22   ` Frank Li
2026-01-20  2:33     ` Sherry Sun
2026-01-19 10:02 ` [PATCH 03/10] arm: dts: imx6qdl: Add Root Port node and move PERST property to Root Port node Sherry Sun
2026-01-19 16:24   ` Frank Li
2026-01-20  2:44     ` Sherry Sun
2026-01-20 16:48       ` Frank Li
2026-01-21  6:44         ` Sherry Sun
2026-01-19 10:02 ` [PATCH 04/10] arm: dts: imx6sx: " Sherry Sun
2026-01-19 10:02 ` [PATCH 05/10] arm: dts: imx7d: " Sherry Sun
2026-01-19 10:02 ` [PATCH 06/10] arm64: dts: imx8mm: " Sherry Sun
2026-01-19 10:02 ` [PATCH 07/10] arm64: dts: imx8mp: " Sherry Sun
2026-01-19 10:02 ` [PATCH 08/10] arm64: dts: imx8mq: Add Root Port nodes " Sherry Sun
2026-01-19 10:02 ` Sherry Sun [this message]
2026-01-19 10:02 ` [PATCH 10/10] arm64: dts: imx95: " Sherry Sun
2026-01-21 23:06 ` [PATCH 00/10] pci-imx6: Add support for parsing the reset property in new Root Port binding Bjorn Helgaas
2026-01-22  4:46   ` Sherry Sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260119100235.1173839-10-sherry.sun@nxp.com \
    --to=sherry.sun@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frank.li@nxp.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox