[PATCH] clk: vf610: Add support for the Ethernet switch clocks

[Lukasz Majewski <lukma@nabladev.com>]

The vf610 device has built in the MoreThanIP L2 switch. For proper
operation it is required to enable ESW and MAC table lookup
clocks.

The MAC table spans from 0x400E_C000 for 0x4000 and it is necessary
to provide clocks for each AIPS1-"slot", which size is 0x1000
(hence four separate entries).

Those can be enabled via clock gating CCM_CCGR10 register
(0x4006_B068).

Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
---
 drivers/clk/imx/clk-vf610.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index 9e11f1c7c397..88c9b656f244 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -309,6 +309,11 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
 	clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
 	clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
+	clk[VF610_CLK_ESW] = imx_clk_gate2("esw", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(8));
+	clk[VF610_CLK_ESW_MAC_TAB0] = imx_clk_gate2("esw_tab0", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(12));
+	clk[VF610_CLK_ESW_MAC_TAB1] = imx_clk_gate2("esw_tab1", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(13));
+	clk[VF610_CLK_ESW_MAC_TAB2] = imx_clk_gate2("esw_tab2", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(14));
+	clk[VF610_CLK_ESW_MAC_TAB3] = imx_clk_gate2("esw_tab3", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(15));
 
 	clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
 
-- 
2.39.5