[PATCH V3 3/3] arm64: dts: imx93: Add i.MX93 Wireless EVK board support

[Sherry Sun <sherry.sun@nxp.com>]

i.MX93 Wireless SiP is created by integrating i.MX93 and IW610 WLCSP
(Wi-Fi + BLE + 802.15.4). And i.MX93 Wireless EVK board with the i.MX93
Wireless SiP basically reuse the i.MX93 11x11 EVK board, with some minor
functional and pin connection differences. Reuse the new
imx93-evk-common.dtsi and add the board-specific changes here.

Here are the detailed differences between i.MX93 Wireless EVK and i.MX93
11x11 EVK board.

Function differences:
Function	i.MX93W EVK			i.MX93 EVK
WIFI/BT		IW610 in i.MX93W		IW612 M.2 module
MQS		N				Y
PDM MIC		N				Y
M.2		N				Y
RPi 40-pin HDR	Limited support(pin conflict) 	Y

Pin connection differences:
Function  Signal name	i.MX93W EVK		i.MX93 EVK
WIFI/BT	  SPI_FRM	SAI1_TXFS (spi1.PCS0)	GPIO_IO08 (spi3.PCS0)
	  SPI_TXD	SAI1_TXC (spi1.SIN)	GPIO_IO09 (spi3.SIN)
	  SPI_RXD	SAI1_RXD0 (spi1.SOUT)	GPIO_IO10 (spi3.SOUT)
	  SPI_CLK	SAI1_TXD0 (spi1.SCK)	GPIO_IO11 (spi3.SCK)
	  SPI_INT	CCM_CLKO1		on-board IO expander
	  NB_WAKE_IN	PDM_CLK			on-module IO expander
	  WL_WAKE_IN	PDM_BIT_STREAM0		on-module IO expander
	  IND_RST_WL	PDM_BIT_STREAM1		on-module IO expander
	  IND_RST_NB	GPIO_IO28		on-module IO expander
	  PDn		GPIO_IO29		on-module IO expander
	  NB_WAKE_OUT	GPIO_IO14		on-board IO expander
	  WL_WAKE_OUT	GPIO_IO15		CCM_CLKO1
I2C3	  I2C3_SDA	GPIO_IO00		GPIO_IO28
	  I2C3_SCL	GPIO_IO01		GPIO_IO29

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile       |  1 +
 arch/arm64/boot/dts/freescale/imx93w-evk.dts | 52 ++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93w-evk.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 700bab4d3e60..d0ea746c59b8 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -418,6 +418,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93w-evk.dts b/arch/arm64/boot/dts/freescale/imx93w-evk.dts
new file mode 100644
index 000000000000..ea76d5df84a1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93w-evk.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+/dts-v1/;
+
+#include "imx93-evk-common.dtsi"
+
+/ {
+	model = "NXP i.MX93W EVK board";
+	compatible = "fsl,imx93-wireless-evk", "fsl,imx93";
+};
+
+&reg_usdhc3_vmmc {
+	pinctrl-0 = <&pinctrl_reg_usdhc3_vmmc>;
+	pinctrl-names = "default";
+	gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+};
+
+&usdhc3_pwrseq {
+	pinctrl-0 = <&pinctrl_usdhc3_pwrseq>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__LPI2C3_SDA			0x40000b9e
+			MX93_PAD_GPIO_IO01__LPI2C3_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_reg_usdhc3_vmmc: regusdhc3vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO29__GPIO2_IO29			0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_pwrseq: usdhc3pwrseqgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO15__GPIO2_IO15			0x31e
+		>;
+	};
+};
-- 
2.37.1