From: Maud Spierings via B4 Relay <devnull+maudspierings.gocontroll.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Matti Vaittinen <mazziesaccount@gmail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Frank Li <Frank.Li@nxp.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Maud Spierings <maudspierings@gocontroll.com>,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v8 0/5] arm64: dts: freescale: add support for the GOcontroll Moduline IV/Mini
Date: Mon, 16 Feb 2026 14:07:07 +0100 [thread overview]
Message-ID: <20260216-mini_iv-v8-0-8d528e7cb454@gocontroll.com> (raw)
Add initial support for the Moduline IV and Moduline Mini embedded
controllers.
These systems are powered by the Ka-Ro Electronics tx8m-1610 COM, which
features an imx8mm SoC.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
Changes in v8:
- Change the Ka-Ro TX8M compatible to line up with the previously added
TX8P karo,imx8mm-tx8m-1610 -> karo,tx8m-1610
- Link to v7: https://lore.kernel.org/r/20260210-mini_iv-v7-0-a3ad8e7ddf0d@gocontroll.com
Changes in v7:
- Fix order in Makefile (Frank)
- Link to v6: https://lore.kernel.org/r/20260205-mini_iv-v6-0-f7cdd8f88144@gocontroll.com
Changes in v6:
- Update trailers
- Fix includes in the mini/iv dts patches (Frank)
- Rebased on latest next
- Link to v5: https://lore.kernel.org/r/20260123-mini_iv-v5-0-29bef040f236@gocontroll.com
Changes in v5:
- Fixup aliases (remove usb ones) (Shawn)
- Link to v4: https://lore.kernel.org/r/20251117-mini_iv-v4-0-5aa63832f51a@gocontroll.com
Changes in v4:
- Fix BUCK6 property order
- Change the BUCK6 min/max voltage to match the dram specs (Lothar)
- Make it clear that the two systems are based on a SoM in commit
message of the dt-bindings (Conor)
- Drop merged PMIC fix (Matti, Mark)
- Link to v3: https://lore.kernel.org/r/20251030-mini_iv-v3-0-ef56c4d9f219@gocontroll.com
Changes in v3:
- Add patch fixing the pmic driver
- Use the proper feedback properties for BUCK6
- Slightly rework the compatibles, acked by conor dropped
- Add missing CAN interface supplies, remove the leftover comment
- Add missing vled-supply
- Add missing ethernet phy interrupt (doesn't work)
- Fix the cs-gpios properties in all spi interfaces
- Fix the order of properties in all spi interfaces
- Remove unused labels for regulators of the PMIC
- Link to v2: https://lore.kernel.org/r/20251022-mini_iv-v2-0-20af8f9aac14@gocontroll.com
Changes in v2:
- Fix allignment issue in imx8mm-tx8m-1610.dtsi (fec1)
- Move phy-reset into fec (works better in barebox)
- Make the gpio-line-names groups of four on every line
- Link to v1: https://lore.kernel.org/r/20251009-mini_iv-v1-0-f3889c492457@gocontroll.com
---
Maud Spierings (5):
dt-bindings: arm: fsl: Add GOcontroll Moduline IV/Mini
arm64: dts: imx8mm: Add pinctrl config definitions
arm64: dts: freescale: add Ka-Ro Electronics tx8m-1610 COM
arm64: dts: freescale: Add the GOcontroll Moduline IV
arm64: dts: freescale: Add the GOcontroll Moduline Mini
Documentation/devicetree/bindings/arm/fsl.yaml | 8 +
arch/arm64/boot/dts/freescale/Makefile | 2 +
arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h | 33 +
.../imx8mm-tx8m-1610-moduline-iv-306-d.dts | 799 +++++++++++++++++++++
.../imx8mm-tx8m-1610-moduline-mini-111.dts | 687 ++++++++++++++++++
.../arm64/boot/dts/freescale/imx8mm-tx8m-1610.dtsi | 444 ++++++++++++
6 files changed, 1973 insertions(+)
---
base-commit: 0f8a890c4524d6e4013ff225e70de2aed7e6d726
change-id: 20251009-mini_iv-a05e5c2c1223
Best regards,
--
Maud Spierings <maudspierings@gocontroll.com>
next reply other threads:[~2026-02-16 13:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-16 13:07 Maud Spierings via B4 Relay [this message]
2026-02-16 13:07 ` [PATCH v8 1/5] dt-bindings: arm: fsl: Add GOcontroll Moduline IV/Mini Maud Spierings via B4 Relay
2026-02-16 13:07 ` [PATCH v8 2/5] arm64: dts: imx8mm: Add pinctrl config definitions Maud Spierings via B4 Relay
2026-02-16 13:07 ` [PATCH v8 3/5] arm64: dts: freescale: add Ka-Ro Electronics tx8m-1610 COM Maud Spierings via B4 Relay
2026-02-16 13:07 ` [PATCH v8 4/5] arm64: dts: freescale: Add the GOcontroll Moduline IV Maud Spierings via B4 Relay
2026-02-16 13:07 ` [PATCH v8 5/5] arm64: dts: freescale: Add the GOcontroll Moduline Mini Maud Spierings via B4 Relay
2026-03-02 16:54 ` (subset) [PATCH v8 0/5] arm64: dts: freescale: add support for the GOcontroll Moduline IV/Mini Frank Li
2026-03-02 16:56 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260216-mini_iv-v8-0-8d528e7cb454@gocontroll.com \
--to=devnull+maudspierings.gocontroll.com@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maudspierings@gocontroll.com \
--cc=mazziesaccount@gmail.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox