From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
linux@ew.tq-group.com, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] arm64: dts: tqma9352-mba93xx*: Change Ethernet PHY IRQ to IRQ_TYPE_LEVEL_LOW
Date: Thu, 5 Mar 2026 17:45:33 +0100 [thread overview]
Message-ID: <20260305164535.2653745-1-alexander.stein@ew.tq-group.com> (raw)
Ethernet PHY interrupt mode is level triggered. Adjust the mode
accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v2:
* Adjusted the subject
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 4760d07ea24b5..9108181e6592b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -242,7 +242,7 @@ ethphy_eqos: ethernet-phy@0 {
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
interrupt-parent = <&gpio3>;
- interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
enet-phy-lane-no-swap;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
@@ -275,7 +275,7 @@ ethphy_fec: ethernet-phy@0 {
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
enet-phy-lane-no-swap;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 8a88c98ac05a7..a78bbc46c59b2 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -172,7 +172,7 @@ ethphy_eqos: ethernet-phy@0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos_phy>;
interrupt-parent = <&gpio3>;
- interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
@@ -205,7 +205,7 @@ ethphy_fec: ethernet-phy@0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_phy>;
interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
--
2.43.0
next reply other threads:[~2026-03-05 16:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-05 16:45 Alexander Stein [this message]
2026-03-05 16:45 ` [PATCH v2 2/2] arm64: dts: tqma9352-mba91xxca: Change Ethernet PHY IRQ to IRQ_TYPE_LEVEL_LOW Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260305164535.2653745-1-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox