[PATCH 1/2] dt-bindings: usb: nxp,ptn5110: add optional orientation-gpio property

[Xu Yang <xu.yang_2@nxp.com>]

The Type-C chip know the cable orientation and then normally will set the
switch channel to correctly configure the data path. Some chips itself
support to output the control signal by indicating the capability in
bit[0] of STANDARD_OUTPUT_CAPABILITIES register and do it in
CONFIG_STANDARD_OUTPUT register. For other chips which don't present this
capability currently there are no way to achieve the orientation setting.
Add an optional "orientation-gpio" property to achieve the same purpose.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
 Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
index 65a8632b4d9e..866b5d033f4e 100644
--- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
+++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -26,6 +26,11 @@ properties:
     $ref: /schemas/connector/usb-connector.yaml#
     unevaluatedProperties: false
 
+  orientation-gpio:
+    description: Optional orientation select control if the chip doesn't
+      present "Connector Orientation" bit[0] in STANDARD_OUTPUT_CAPABILITIES
+      register.
+
 required:
   - compatible
   - reg

-- 
2.34.1