From: Sherry Sun <sherry.sun@nxp.com>
To: hongxing.zhu@nxp.com, l.stach@pengutronix.de, Frank.Li@nxp.com,
bhelgaas@google.com, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, s.hauer@pengutronix.de,
festevam@gmail.com
Cc: imx@lists.linux.dev, kernel@pengutronix.de,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V9 05/13] PCI: imx6: Add support for parsing the reset property in new Root Port binding
Date: Wed, 18 Mar 2026 14:29:08 +0800 [thread overview]
Message-ID: <20260318062916.2747472-6-sherry.sun@nxp.com> (raw)
In-Reply-To: <20260318062916.2747472-1-sherry.sun@nxp.com>
The current DT binding for pci-imx6 specifies the 'reset-gpios' property
in the host bridge node. However, the PERST# signal logically belongs to
individual Root Ports rather than the host bridge itself. This becomes
important when supporting PCIe KeyE connector and PCI power control
framework for pci-imx6 driver, which requires properties to be specified
in Root Port nodes.
With the common Root Port parsing now handled in dw_pcie_host_init(),
update the reset GPIO handling to use the parsed port list from
bridge->ports. To maintain DT backwards compatibility, fallback to the
legacy method of parsing the host bridge node if the reset property is
not present in the Root Port node (indicated by an empty ports list).
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 70 +++++++++++++++++++++------
1 file changed, 55 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 83beca5a1fc2..703b22d06526 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -34,6 +34,7 @@
#include <linux/pm_runtime.h>
#include "../../pci.h"
+#include "../pci-host-common.h"
#include "pcie-designware.h"
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
@@ -150,7 +151,6 @@ struct imx_lut_data {
struct imx_pcie {
struct dw_pcie *pci;
- struct gpio_desc *reset_gpiod;
struct clk_bulk_data *clks;
int num_clks;
bool supports_clkreq;
@@ -1222,6 +1222,32 @@ static void imx_pcie_disable_device(struct pci_host_bridge *bridge,
imx_pcie_remove_lut(imx_pcie, pci_dev_id(pdev));
}
+static int imx_pcie_parse_legacy_binding(struct imx_pcie *pcie)
+{
+ struct device *dev = pcie->pci->dev;
+ struct pci_host_bridge *bridge = pcie->pci->pp.bridge;
+ struct pci_host_port *port;
+ struct gpio_desc *reset;
+
+ reset = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
+ if (IS_ERR(reset))
+ return PTR_ERR(reset);
+
+ if (!reset)
+ return 0;
+
+ port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ port->reset = reset;
+ INIT_LIST_HEAD(&port->list);
+ list_add_tail(&port->list, &bridge->ports);
+
+ return devm_add_action_or_reset(dev, pci_host_common_delete_ports,
+ &bridge->ports);
+}
+
static void imx_pcie_vpcie_aux_disable(void *data)
{
struct regulator *vpcie_aux = data;
@@ -1231,13 +1257,22 @@ static void imx_pcie_vpcie_aux_disable(void *data)
static void imx_pcie_assert_perst(struct imx_pcie *imx_pcie, bool assert)
{
- if (assert) {
- gpiod_set_value_cansleep(imx_pcie->reset_gpiod, 1);
- } else {
- if (imx_pcie->reset_gpiod) {
- msleep(PCIE_T_PVPERL_MS);
- gpiod_set_value_cansleep(imx_pcie->reset_gpiod, 0);
- msleep(PCIE_RESET_CONFIG_WAIT_MS);
+ struct dw_pcie *pci = imx_pcie->pci;
+ struct pci_host_bridge *bridge = pci->pp.bridge;
+ struct pci_host_port *port;
+
+ if (!bridge)
+ return;
+
+ list_for_each_entry(port, &bridge->ports, list) {
+ if (assert) {
+ gpiod_set_value_cansleep(port->reset, 1);
+ } else {
+ if (port->reset) {
+ msleep(PCIE_T_PVPERL_MS);
+ gpiod_set_value_cansleep(port->reset, 0);
+ msleep(PCIE_RESET_CONFIG_WAIT_MS);
+ }
}
}
}
@@ -1247,8 +1282,20 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct device *dev = pci->dev;
struct imx_pcie *imx_pcie = to_imx_pcie(pci);
+ struct pci_host_bridge *bridge = pp->bridge;
int ret;
+ /*
+ * For DT backward compatibility: if no Root Port nodes were parsed
+ * (indicated by empty ports list), parse reset-gpios from the host
+ * bridge node.
+ */
+ if (bridge && list_empty(&bridge->ports)) {
+ ret = imx_pcie_parse_legacy_binding(imx_pcie);
+ if (ret)
+ return ret;
+ }
+
imx_pcie_assert_perst(imx_pcie, true);
/* Keep 3.3Vaux supply enabled for the entire PCIe controller lifecycle */
@@ -1712,13 +1759,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
return PTR_ERR(imx_pcie->phy_base);
}
- /* Fetch GPIOs */
- imx_pcie->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(imx_pcie->reset_gpiod))
- return dev_err_probe(dev, PTR_ERR(imx_pcie->reset_gpiod),
- "unable to get reset gpio\n");
- gpiod_set_consumer_name(imx_pcie->reset_gpiod, "PCIe reset");
-
/* Fetch clocks */
imx_pcie->num_clks = devm_clk_bulk_get_all(dev, &imx_pcie->clks);
if (imx_pcie->num_clks < 0)
--
2.37.1
next prev parent reply other threads:[~2026-03-18 6:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-18 6:29 [PATCH V9 00/13] pci-imx6: Add support for parsing the reset property in new Root Port binding Sherry Sun
2026-03-18 6:29 ` [PATCH V9 01/13] dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node Sherry Sun
2026-03-18 6:29 ` [PATCH V9 02/13] PCI: host-generic: Add common helpers for parsing Root Port properties Sherry Sun
2026-03-18 6:29 ` [PATCH V9 03/13] PCI: dwc: Parse Root Port nodes in dw_pcie_host_init() Sherry Sun
2026-03-18 6:29 ` [PATCH V9 04/13] PCI: imx6: Assert PERST# before enabling regulators Sherry Sun
2026-03-18 6:29 ` Sherry Sun [this message]
2026-03-18 6:29 ` [PATCH V9 06/13] arm: dts: imx6qdl: Add Root Port node and PERST property Sherry Sun
2026-03-18 6:29 ` [PATCH V9 07/13] arm: dts: imx6sx: " Sherry Sun
2026-03-18 6:29 ` [PATCH V9 08/13] arm: dts: imx7d: " Sherry Sun
2026-03-18 6:29 ` [PATCH V9 09/13] arm64: dts: imx8mm: " Sherry Sun
2026-03-18 6:29 ` [PATCH V9 10/13] arm64: dts: imx8mp: " Sherry Sun
2026-03-18 6:29 ` [PATCH V9 11/13] arm64: dts: imx8mq: " Sherry Sun
2026-03-18 6:29 ` [PATCH V9 12/13] arm64: dts: imx8dxl/qm/qxp: " Sherry Sun
2026-03-18 6:29 ` [PATCH V9 13/13] arm64: dts: imx95: " Sherry Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260318062916.2747472-6-sherry.sun@nxp.com \
--to=sherry.sun@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox