Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: shengjiu.wang@oss.nxp.com
Cc: conor+dt@kernel.org, Frank.Li@kernel.org, imx@lists.linux.dev,
	devicetree@vger.kernel.org, robh@kernel.org
Subject: Re: [PATCH 3/4] ASoC: fsl_asrc: expose individual DAIs per conversion pair
Date: Mon, 20 Jul 2026 10:33:41 +0000	[thread overview]
Message-ID: <20260720103342.41A751F00A3E@smtp.kernel.org> (raw)
In-Reply-To: <20260720095450.1618747-4-shengjiu.wang@oss.nxp.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] The newly registered DAIs (`paira`, `pairb`, `pairc`) share the exact same `dma_params_tx` and `dma_params_rx` structures, causing a data race and potential DMA misconfiguration when multiple streams are configured concurrently.
--

--- Patch [3]: [PATCH 3/4] ASoC: fsl_asrc: expose individual DAIs per conversion pair ---
commit 71178f6edf2667b8ee88b95ef47b739e170cca4b
Author: Shengjiu Wang <shengjiu.wang@nxp.com>

ASoC: fsl_asrc: expose individual DAIs per conversion pair

The i.MX ASRC hardware supports three independent conversion pairs
(A, B, C). This commit replaces the single fsl_asrc_dai instance
with an array of three DAI drivers, one per pair, allowing them
to be routed to separate audio paths simultaneously.

> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 0b28bcfa47fed..f83d6cdc6412d 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c

[ ... ]

> @@ -1404,7 +1453,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  		goto err_pm_get_sync;
>  
>  	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component,
> -					      &fsl_asrc_dai, 1);
> +					      fsl_asrc_dai, ARRAY_SIZE(fsl_asrc_dai));

[Severity: High]
Since this registers multiple DAIs to enable concurrent stream access, can this
cause a data race with the shared DMA parameters?

In fsl_asrc_dai_probe(), all three DAIs are assigned pointers to the exact same
shared DMA parameter structures:

	snd_soc_dai_init_dma_data(dai, &asrc->dma_params_tx,
				  &asrc->dma_params_rx);

When multiple streams are configured concurrently, they will race to overwrite
these shared parameters without locking.

For example, in fsl_asrc_dma_hw_params():

	dma_params_fe = snd_soc_dai_get_dma_data(snd_soc_rtd_to_cpu(rtd, 0), substream);
	dma_params_fe->addr = asrc->paddr + asrc->get_fifo_addr(!dir, index);
	dma_params_fe->maxburst = dma_params_be->maxburst;

Could this concurrent mutation cause DMA channels to be programmed with incorrect
FIFO addresses or maxburst values, resulting in audio cross-talk or DMA engine
errors?

>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to register ASoC DAI\n");
>  		goto err_pm_get_sync;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260720095450.1618747-1-shengjiu.wang@oss.nxp.com?part=3

  reply	other threads:[~2026-07-20 10:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-20  9:54 [PATCH 0/4] ASoC: fsl: expose individual DAIs per ASRC/EASRC conversion pair/context shengjiu.wang
2026-07-20  9:54 ` [PATCH 1/4] dt-bindings: sound: fsl,imx-asrc: update port binding to support multiple pairs shengjiu.wang
2026-07-20 10:03   ` sashiko-bot
2026-07-20 14:28   ` Mark Brown
2026-07-21  8:58     ` Shengjiu Wang
2026-07-20  9:54 ` [PATCH 2/4] dt-bindings: sound: fsl,easrc: add ports binding for multiple contexts shengjiu.wang
2026-07-20 10:16   ` sashiko-bot
2026-07-20  9:54 ` [PATCH 3/4] ASoC: fsl_asrc: expose individual DAIs per conversion pair shengjiu.wang
2026-07-20 10:33   ` sashiko-bot [this message]
2026-07-20  9:54 ` [PATCH 4/4] ASoC: fsl_easrc: expose individual DAIs per conversion context shengjiu.wang
2026-07-20 10:43   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260720103342.41A751F00A3E@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=shengjiu.wang@oss.nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox