Re: [PATCH v30 6/7] arm64: dts: imx8ulp: add secure enclave node

[sashiko-bot@kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Missing 'memory-region' DT property causes EdgeLock Enclave driver probe failure
--

--- Patch [6]: [PATCH v30 6/7] arm64: dts: imx8ulp: add secure enclave node ---
commit dd89141b9b11f1e2b0130369e668c9487347c666
Author: Pankaj Gupta <pankaj.gupta@nxp.com>

arm64: dts: imx8ulp: add secure enclave node

This commit adds support for the NXP secure enclave called EdgeLock Enclave
firmware for imx8ulp-evk. It adds the sram0 label and a new secure-enclave
device tree node.

> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index c6d1bb9edf388..182f1444b6434 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi

[ ... ]

> @@ -185,6 +185,13 @@ scmi_sensor: protocol@15 {
>  				#thermal-sensor-cells = <1>;
>  			};
>  		};
> +
> +		hsm0: secure-enclave {
> +			compatible = "fsl,imx8ulp-se-ele-hsm";
> +			mbox-names = "tx", "rx";
> +			mboxes = <&s4muap 0 0>, <&s4muap 1 0>;
> +			sram = <&sram0>;
> +		};

[Severity: High]
Will this node cause the EdgeLock Enclave driver probe to fail?

Looking at se_if_probe() in drivers/firmware/imx/se_ctrl.c, the driver requires
reserved memory initialization when reserved_dma_ranges is set (which is true
for the fsl,imx8ulp-se-ele-hsm compatibility string):

drivers/firmware/imx/se_ctrl.c:se_if_probe() {
    ...
	if (if_node->reserved_dma_ranges) {
		ret = of_reserved_mem_device_init(dev);
		if (ret)
			return dev_err_probe(dev, ret,
					    "Failed to init reserved memory region.");
	}
    ...
}

Since the memory-region property is missing from this new device tree node,
of_reserved_mem_device_init() will return an error, causing the probe to
unconditionally abort. Should a memory-region property be included here to
prevent the probe failure?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260724-imx-se-if-v30-0-ce8ba256692c@nxp.com?part=6