From: sashiko-bot@kernel.org
To: "Linkai Gong" <gonglinkai@kylinos.cn>
Cc: Frank.Li@kernel.org, imx@lists.linux.dev
Subject: Re: [PATCH] firmware: imx: dsp: fix mailbox channel leak on kasprintf failure
Date: Thu, 13 Aug 2026 10:08:45 +0000 [thread overview]
Message-ID: <20260813100846.064971F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260813095818.2275666-1-gonglinkai@kylinos.cn>
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
Pre-existing issues:
- [High] Unchecked return value of `imx_dsp_request_channel()` in `imx_common_resume()` leads to invalid pointer dereferences when an `ERR_PTR` is passed to the mailbox framework.
- [High] Mailbox channels can be double-freed when the SOF driver is unbound while in a PM runtime suspended state, potentially freeing another client's active mailbox channel.
- [High] Mailbox channels are requested and activated before `dsp_ipc->ops` is initialized, creating a race condition where an incoming IPC message triggers a NULL pointer dereference.
--
--- Patch [1]: [PATCH] firmware: imx: dsp: fix mailbox channel leak on kasprintf failure ---
commit 227ebd73d256ff38d002fc31b92731a44c2287e6
Author: Linkai Gong <gonglinkai@kylinos.cn>
firmware: imx: dsp: fix mailbox channel leak on kasprintf failure
This commit fixes a memory leak in imx_dsp_setup_channels(). If kasprintf()
fails to allocate memory for a channel name, the function now properly routes
the failure through the existing cleanup path to free previously requested
channels.
> diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
> index ed79e823157af..7e3f45ddf0c18 100644
> --- a/drivers/firmware/imx/imx-dsp.c
> +++ b/drivers/firmware/imx/imx-dsp.c
> @@ -99,8 +99,10 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
> else
> chan_name = kasprintf(GFP_KERNEL, "rxdb%d", i - 2);
>
> - if (!chan_name)
> - return -ENOMEM;
> + if (!chan_name) {
> + ret = -ENOMEM;
> + goto out;
> + }
>
> dsp_chan = &dsp_ipc->chans[i];
> dsp_chan->name = chan_name;
[Severity: High]
This isn't a bug introduced by this patch, but I have a question about the
return value of imx_dsp_request_channel() in imx_common_resume().
If imx_dsp_request_channel() returns an error pointer during resume, it
appears we ignore the return value:
sound/soc/sof/imx/imx-common.c:imx_common_resume() {
[ ... ]
for (i = 0; i < DSP_MU_CHAN_NUM; i++)
imx_dsp_request_channel(common->ipc_handle, i);
[ ... ]
return 0;
}
This can leave an unchecked error pointer in dsp_chan->ch. If the sof core then
attempts to send an ipc message, imx_dsp_ring_doorbell() passes this pointer
to mbox_send_message(). Could this cause a panic in the mailbox framework when
it tries to evaluate the invalid pointer?
[Severity: High]
This is a pre-existing issue, but does this cleanup pattern risk a double-free
of mailbox channels?
When the device goes into pm runtime suspend, we free the channels but don't
clear the pointer:
drivers/firmware/imx/imx-dsp.c:imx_dsp_free_channel() {
[ ... ]
dsp_chan = &dsp_ipc->chans[idx];
mbox_free_channel(dsp_chan->ch);
}
If the driver is then unbound while suspended, imx_dsp_remove() unconditionally
iterates over all channels and frees them again:
drivers/firmware/imx/imx-dsp.c:imx_dsp_remove() {
[ ... ]
for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
dsp_chan = &dsp_ipc->chans[i];
mbox_free_channel(dsp_chan->ch);
kfree(dsp_chan->name);
}
[ ... ]
}
Could this second mbox_free_channel() call force-free a channel that was
meanwhile requested by another client, or panic if it was left as an error
pointer?
[Severity: High]
This is a pre-existing issue, but is there a race condition during probe with
incoming ipc messages?
During imx_probe(), we register the platform device (which requests the mailbox
channels and activates the rx callback) before assigning the ops:
sound/soc/sof/imx/imx-common.c:imx_probe() {
[ ... ]
common->ipc_dev = platform_device_register_data(sdev->dev, "imx-dsp",
PLATFORM_DEVID_NONE,
pdev, sizeof(*pdev));
[ ... ]
common->ipc_handle->ops = &imx_ipc_ops;
}
If the dsp is already running and sends an ipc message before ops is assigned,
could imx_dsp_handle_rx() trigger a null pointer dereference here?
drivers/firmware/imx/imx-dsp.c:imx_dsp_handle_rx() {
[ ... ]
if (chan->idx == 0) {
chan->ipc->ops->handle_reply(chan->ipc);
} else {
[ ... ]
}
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260813095818.2275666-1-gonglinkai@kylinos.cn?part=1
next prev parent reply other threads:[~2026-08-13 10:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 9:58 [PATCH] firmware: imx: dsp: fix mailbox channel leak on kasprintf failure Linkai Gong
2026-08-13 10:08 ` sashiko-bot [this message]
2026-08-13 16:40 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813100846.064971F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=gonglinkai@kylinos.cn \
--cc=imx@lists.linux.dev \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox