Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Chancel Liu" <chancel.liu@oss.nxp.com>
Cc: robh@kernel.org, devicetree@vger.kernel.org, imx@lists.linux.dev,
	conor+dt@kernel.org, Frank.Li@kernel.org
Subject: Re: [PATCH 01/17] arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties for MQS
Date: Fri, 14 Aug 2026 07:30:22 +0000	[thread overview]
Message-ID: <20260814073023.0B4F21F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260814072022.4064009-2-chancel.liu@oss.nxp.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Incomplete refactoring leaves duplicated property definitions in board files, mismatching the stated commit intent.
--

--- Patch [1]: [PATCH 01/17] arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties for MQS ---
commit 3f3b7186dd0d4a7ad6f02447032fc2e5538b3ca5
Author: Chancel Liu <chancel.liu@nxp.com>

arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties for MQS

This commit adds the mclk and #sound-dai-cells properties to the mqs1 and
mqs2 nodes in the common imx91/93 dtsi. The intent is to define these fixed
SoC integration properties centrally rather than duplicating them across
individual board files.

> The "mclk" clock provides the MQS oversampling clock, and #sound-dai-cells
> describes the node as an ASoC DAI provider. Both are fixed SoC integration
> properties rather than board specific, so add them here in the common dtsi
> instead of duplicating them in each board dts.

[Severity: Medium]
The commit message mentions adding these properties here instead of
duplicating them in each board dts. Should this patch also remove the
existing duplicated properties from the board files?

It appears clocks and clock-names are still defined for the mqs1 node override
in arch/arm64/boot/dts/freescale/imx91-11x11-frdm.dts:

&mqs1 {
        clocks = <&clk IMX93_CLK_MQS1_GATE>;
        clock-names = "mclk";
...

These duplicate properties also still exist in the mqs1 node override in
arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts.

> diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
> index a1a7e6a0571bd..a68ffd04ee084 100644
> --- a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
> @@ -100,13 +100,19 @@ gic: interrupt-controller@48000000 {
>  
>  	mqs1: mqs1 {
>  		compatible = "fsl,imx93-mqs";
> +		clocks = <&clk IMX93_CLK_MQS1_GATE>;
> +		clock-names = "mclk";
>  		gpr = <&aonmix_ns_gpr>;
> +		#sound-dai-cells = <0>;
>  		status = "disabled";
>  	};
>  
>  	mqs2: mqs2 {
>  		compatible = "fsl,imx93-mqs";
> +		clocks = <&clk IMX93_CLK_MQS2_GATE>;
> +		clock-names = "mclk";
>  		gpr = <&wakeupmix_gpr>;
> +		#sound-dai-cells = <0>;
>  		status = "disabled";
>  	};

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260814072022.4064009-1-chancel.liu@oss.nxp.com?part=1

  reply	other threads:[~2026-08-14  7:30 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-14  7:20 [PATCH 00/17] arm64: dts: Add MQS1 sound card support for i.MX9 EVK platforms Chancel Liu
2026-08-14  7:20 ` [PATCH 01/17] arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties for MQS Chancel Liu
2026-08-14  7:30   ` sashiko-bot [this message]
2026-08-14  7:20 ` [PATCH 02/17] arm64: dts: imx91-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 03/17] arm64: dts: imx91-11x11-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:31   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 04/17] arm64: dts: imx93-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 05/17] arm64: dts: imx93-11x11-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:33   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 06/17] arm64: dts: imx93-14x14-evk: Add board muxes to select between FlexCAN1 and MQS1 Chancel Liu
2026-08-14  7:31   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 07/17] arm64: dts: imx93-14x14-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:33   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 08/17] arm64: dts: imx94: Add clock and sound-dai-cells properties " Chancel Liu
2026-08-14  7:20 ` [PATCH 09/17] arm64: dts: imx943-evk: Add board muxes to select between CAN1/PDM and MQS1/MIC Chancel Liu
2026-08-14  7:20 ` [PATCH 10/17] arm64: dts: imx943-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 11/17] arm64: dts: imx95: Add clock and sound-dai-cells properties " Chancel Liu
2026-08-14  7:30   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 12/17] arm64: dts: imx95-15x15-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 13/17] arm64: dts: imx95-15x15-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:36   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 14/17] arm64: dts: imx952: Add AONMIX MQS device node Chancel Liu
2026-08-14  7:20 ` [PATCH 15/17] arm64: dts: imx952-evk: Add board muxes to select between CAN1/PDM Chancel Liu
2026-08-14  7:20 ` [PATCH 16/17] arm64: dts: imx952-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:42   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 17/17] arm64: dts: fsl: Add DT overlay to build MQS1 sound cards on i.MX9 platforms Chancel Liu
2026-08-14  7:40   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260814073023.0B4F21F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=chancel.liu@oss.nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox