Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Joy Zou" <joy.zou@oss.nxp.com>
Cc: devicetree@vger.kernel.org, Frank.Li@kernel.org, robh@kernel.org,
	conor+dt@kernel.org, imx@lists.linux.dev
Subject: Re: [PATCH 2/2] arm64: dts: imx93-evk/qsb: add rtc1 alias for external PCF2131 RTC
Date: Mon, 14 Sep 2026 03:29:40 +0000	[thread overview]
Message-ID: <20260914032940.7A54E1F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260914-b4_imx91_93_rtc-v1-2-daed1cba0714@oss.nxp.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] This problem wasn't introduced by this patch, but several other NXP boards with multiple RTCs lack explicit RTC aliases, leading to the exact same unpredictable /dev/rtcN numbering that this patch fixes.
--

commit 3914a89ee5c45116b8135c7ac05a01b772cb8462
Author: Joy Zou <joy.zou@oss.nxp.com>

arm64: dts: imx93-evk/qsb: add rtc1 alias for external PCF2131 RTC

This commit fixes unpredictable /dev/rtcN numbering for imx93 boards by adding
an explicit rtc1 alias.

> Only rtc0 was aliased to bbnsm_rtc, while the external pcf2131 had
> no fixed index. When both drivers are modules, the pcf2131 may register
> first and take rtc0, pushing bbnsm_rtc to rtc1. Since suspend/resume
> wakeup relies on the internal bbnsm RTC at rtc0, this broke wakeup.
> 
> Add rtc1 alias for the pcf2131 on imx93-11x11-evk and imx93-9x9-qsb,
> so it keeps a fixed index while bbnsm_rtc stays rtc0.

[Severity: High]
This isn't a bug introduced by this patch, but several other NXP boards with
multiple RTCs lack explicit RTC aliases, leading to the exact same
unpredictable /dev/rtcN numbering that this patch fixes.

For example, in arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts:

	rtc@53 {
		compatible = "nxp,pcf2131";

This board defines multiple RTCs (pcf2129 and pcf2131) without aliases,
leaving them susceptible to the same index race condition.

In arch/arm64/boot/dts/freescale/imx8mp-navqp.dts:

	rtc@53 {
		compatible = "nxp,pcf2131";

This board defines an external RTC alongside the SoC's internal snvs_rtc
without any aliases, causing unpredictable index assignment.

In arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts:

	rtc@51 {
				compatible = "nxp,pcf2129";

This board defines multiple external RTCs without a complete set of aliases,
leading to unpredictable rtc0/rtc2 index assignment.

A race condition between module probes will swap these indices unpredictably,
which can break system time initialization (since CONFIG_RTC_HCTOSYS_DEVICE
defaults to rtc0) or suspend/resume wakeup functionality.

Could these other boards also be updated with explicit RTC aliases to prevent
the same issue?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260914-b4_imx91_93_rtc-v1-0-daed1cba0714@oss.nxp.com?part=2

  reply	other threads:[~2026-09-14  3:29 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-14  3:21 [PATCH 0/2] arm64: dts: imx91/imx93: add rtc1 alias for external PCF2131 RTC Joy Zou
2026-09-14  3:21 ` [PATCH 1/2] arm64: dts: imx91-evk/qsb: " Joy Zou
2026-09-14  3:21 ` [PATCH 2/2] arm64: dts: imx93-evk/qsb: " Joy Zou
2026-09-14  3:29   ` sashiko-bot [this message]
2026-09-23 20:24 ` [PATCH 0/2] arm64: dts: imx91/imx93: " Frank.Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260914032940.7A54E1F000FF@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=joy.zou@oss.nxp.com \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox