Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage

Dinh Nguyen
2024-04-15T11:16:00Z

On 4/12/24 17:28, Rob Herring wrote:
> The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
> it doesn't provide any detail on uarch specific events.
>
> There's still remaining cases for CPUs without any corresponding PMU
> definition and for big.LITTLE systems which only have a single PMU node
> (there should be one per core type).
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> SoC Maintainers, Can you please apply this directly.
> ---
> arch/arm/boot/dts/broadcom/bcm2711.dtsi | 4 ++--
> arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 2 +-
> arch/arm64/boot/dts/amazon/alpine-v2.dtsi | 2 +-
> arch/arm64/boot/dts/apm/apm-storm.dtsi | 2 +-
> arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +-
> arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +-
> arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 2 +-
> arch/arm64/boot/dts/cavium/thunder-88xx.dtsi | 2 +-
> arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi | 2 +-
> arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
> arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
> arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 7 +++++++
> arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 7 +++++++
> arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 -----
> arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 2 +-
> arch/arm64/boot/dts/intel/keembay-soc.dtsi | 2 +-
> arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 2 +-

For SoCFPGA,

Acked-by: Dinh Nguyen <dinguyen@kernel.org>