From: Miquel Raynal <miquel.raynal@bootlin.com>
To: "Michael Walle" <michael@walle.cc>
Cc: <haibo.chen@oss.nxp.com>, "Pratyush Yadav" <pratyush@kernel.org>,
"Michael Walle" <mwalle@kernel.org>,
"Takahiro Kuwano" <takahiro.kuwano@infineon.com>,
"Richard Weinberger" <richard@nod.at>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<imx@lists.linux.dev>, "Haibo Chen" <haibo.chen@nxp.com>,
<stable@vger.kernel.org>
Subject: Re: [PATCH v5] mtd: spi-nor: clear the default read_sr2 opcode for Octal DTR flashes
Date: Wed, 18 Nov 2026 15:21:17 +0100 [thread overview]
Message-ID: <87h5hei5k2.fsf@bootlin.com> (raw)
In-Reply-To: <DMYBR7I0R1PK.25FUNB24SPCFS@walle.cc> (Michael Walle's message of "Wed, 18 Nov 2026 13:10:38 +0100")
On 18/11/2026 at 13:10:38 +01, "Michael Walle" <michael@walle.cc> wrote:
> On Fri Oct 23, 2026 at 9:11 AM CEST, haibo.chen wrote:
>> From: Haibo Chen <haibo.chen@nxp.com>
>>
>> The core defaults opcodes.read_sr2 to the legacy RDCR opcode (0x35), and
>> spi_nor_cache_sr_lock_bits() reads SR2 during spi_nor_init(), i.e. after
>> the flash has been switched to its runtime protocol. On an octal flash
>> running in 8D-8D-8D mode the opcode is extended per cmd_ext_type (e.g.
>> 0x3535), but RDCR is not a valid register read there: these parts access
>> their status/configuration registers through a vendor-specific indirect
>> space, if at all. The flash does not answer, the register read times out
>> and probe (or resume) fails (on i.MX FlexSPI: -ETIMEDOUT and a controller
>> WARN(), seen with a Micron MT35XU01G and a Macronix MX25UW51345G).
>>
>> Clear read_sr2 on every path that enables 8D-8D-8D, so that
>> spi_nor_read_sr1_and_sr2() degrades to an SR1-only read and no
>> unsupported command is issued. A manufacturer driver that genuinely
>> needs an SR2 read in this mode can still install its own opcode in a
>> later fixup.
>>
>> - spi_nor_parse_profile1(): the common case. The xSPI Profile 1.0 table
>> does not describe any SR2/RDCR read, and it runs before the
>> manufacturer late_init.
>> - mt35xu512aba_post_sfdp_fixup(): some mt35xu512aba batches lack the
>> Profile 1.0 table and enable 8D here instead, with the BFPT QER field
>> left at a reserved value so read_sr2 keeps its RDCR default.
>> - spi_nor_no_sfdp_init_params(): non-SFDP parts that enable 8D via
>> SPI_NOR_OCTAL_DTR_READ keep the RDCR default too.
>>
>> CMP (the only user of SR2 beyond quad-enable in the locking code) is
>> Winbond-specific and is not placed in SR2 on their 8D-capable parts, so
>> no octal flash loses a usable SR2 read because of this change.
>>
>> Fixes: 63489002d397 ("mtd: spi-nor: Refactor Read Status/Write Status support")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
>> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
>
>
> Miquel, if you want to pick it yourself for fixes, otherwise I can
> also push it there.
>
> In any case,
>
> Acked-by: Michael Walle <mwalle@kernel.org>
Sorry, I'm used to be the only one doing that job. Please do it.
Miquèl
prev parent reply other threads:[~2026-11-18 14:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 7:11 [PATCH v5] mtd: spi-nor: clear the default read_sr2 opcode for Octal DTR flashes haibo.chen
2026-11-10 8:13 ` Bough Chen
2026-11-17 9:34 ` Miquel Raynal
2026-11-18 12:10 ` Michael Walle
2026-11-18 14:21 ` Miquel Raynal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h5hei5k2.fsf@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=haibo.chen@nxp.com \
--cc=haibo.chen@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=mwalle@kernel.org \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=stable@vger.kernel.org \
--cc=takahiro.kuwano@infineon.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox